Adhesives

Tamiya Masking Tape is thin, very strong adhesive tape for modeling use. It even adheres well to uneven surfaces. It's ideal when sharp and crisp lines are required. This tape will not absorb paint color, or leave unsightly marks, making it perfect for...

Tamiya Masking Tape is thin, very strong adhesive tape for modeling use. It even adheres well to uneven surfaces. It's ideal when sharp and crisp lines are required. This tape will not absorb paint color, or leave unsightly marks, making it perfect for...

Plastic Model glue with applicator brush.  Excellent for plastic models

Keep lichen from drying out by spraying it with glycerine. Can also be used to help refresh other scenery materials.

Mix with 4 parts water and this liquid can be brushed or sprayed and will not yellow with age. Apply it to your scenery base or tree armatures and then add Flock & Turf (sold separately) in the color of your choice. Scenic Express Multi Scale...

Concentrated MATTE MEDIUM - 16 oz. bottle of transparent scenery cement. Matte Medium is our most economical transparent scenery cement. Matte Medium will never dry out or deteriorate. It will never turn yellow like regular household glue and will always...

SprayMister - 20 oz. clog-resistant. The BEST we've found for scenery! This one will last! Completely adjustable from hard stream to fine mist. Special filter screen stem prevents clogging. Useful for applying Matte Mediums, glycerine, scenic colors and...

PREPARED MATTE MEDIUM - 1-Gallon. 'Ready Prepared' 1-gallon bottle of transparent scenery cement. Matte Medium is our most economical transparent scenery cement. Matte Medium will never dry out or deteriorate. It will never turn yellow like regular...

PREPARED MATTE MEDIUM - 16 oz. 'Ready Prepared' 16 oz. bottle of transparent scenery cement. Matte Medium is our most economical transparent scenery cement. Matte Medium will never dry out or deteriorate. It will never turn yellow like regular household...

A colorless, liquid, plastic-fusing adhesive. Dissolves a thin layer of each surface to form a welded joint as strong as the surrounding area. Bonds Styrene to Styrene, ABS to ABS and most other alike plastic combinations. Plastruct Bondene Plastic...

A colorless, liquid, plastic-fusing adhesive. Dissolves a thin layer of each surface to form a welded joint as strong as the surrounding area. Bonds styrene, ABS, butrate and acrylics.

The Pecoscene Static Grass range enables modellers to produce realistic fields, grassed areas, moorlands and embankments. The Static Grass Applicators PSG-1 and 2 electrostatically charge the grass filaments so that they stand vertically, regardless of...

1 oz. bottleThere is nothing quite like Micro Weld styrene solvent cement. You will find that application isvery much different from, and easier than, other cements. It is much more forgiving than othercements are, stronger when dry, and will not craze...

1 oz. bottleMicro Liquidtape is a liquid adhesive that when applied to one side of a part and allowed todry, can be pressed on to another clean part where it will stick firmly enough for a display model.You can take it apart again and again as long as...

Fast drying bonder/welder for styrene plastic and acrylic models JMD Hobby Multi Scale Styrene Tack It II

UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone...

INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from...

SUPER-GOLD™ Thin and SUPER-GOLD+™ gap filling medium thickness are our odorless foam safe CAs. They are non-frosting and take only 2 or 3 seconds longer to bond compared to Insta-Cure and Insta-Cure+. There are no fumes that irritate the nose...

SUPER-GOLD™ Thin and SUPER-GOLD+™ gap filling medium thickness are our odorless foam safe CAs. They are non-frosting and take only 2 or 3 seconds longer to bond compared to Insta-Cure and Insta-Cure+. There are no fumes that irritate the nose...

Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface...