DCC & DC

This small oval speaker is ideal for narrow hood diesels. Dimensions: 35 x 16 x 8mm(D)Frequency Response: 250Hz - 13kHzPower: 1 Watt (Nominal) 2 Watts (Peak)Impedance: 8 Ohms

This small speaker is perfect for narrow hood diesels and anywhere else where space is at a premium. Dimensions: 25 x 14 x 5.2mm(D)Frequency Response: 740Hz - 4kHzPower: 1 Watt (Nominal) 1.5 Watts (Peak)Impedance: 8 Ohms

This snap-together baffle kit is designed for use with our 28mm round speakers (P.N. 810054 or 810153).

This is one of our largest speakers for use with the TSU-4400 in O-scale or larger models. Dimensions: 50 x 90 x37.5mm(D)Frequency Response: 230Hz - 20kHzPower: 2 Watts (Nominal) 5 Watts (Peak)Impedance: 8 Ohms

This assortment includes 6" each of 1/16", 3/32", 1/8" and 1/4" diameter tubing for insulating solder connections.

The Decoder Buddy V5 and V5B were developed for the 12 output decoders and include a couple added features. This mother board does not include the 21-Pin Decoder. This mother board requires soldering. This printed circuit board is NOT INTENDED FOR USE IN...

Keep Throttles Off Layout Scenery with Throttle Pockets™ During layout operating sessions modelers are always looking for a place to set down their throttles. Universal Throttle Pockets from New Rail Models offer a convenient alternative to...

Keep Throttles Off Layout Scenery with Throttle Pockets™ During layout operating sessions modelers are always looking for a place to set down their throttles. Universal Throttle Pockets from New Rail Models offer a convenient alternative to...

Part Number5240299 Dimensions100ft of 20mm (.787) NCEKAP20 100ft of 20mm (.787) Kapton Tape Polyimide Film Tape consists of Kapton® polyimide film and silicon adhesive. It is designed for high temperature applications. Temperature use range is -100...

Part Number5240298 Dimensions100ft of 10mm (.393) NCEKAP10 100ft of 10mm (.393) Kapton Tape Polyimide Film Tape consists of Kapton® polyimide film and silicon adhesive. It is designed for high temperature applications. Temperature use range is -100...

DCC Main Bus Wire, (Red), 14AWG, 50 Feet NCE Multi Scale DCC Main Bus Wire Red 50'

DCC Main Bus Wire, (Black), 14AWG, 50 Feet NCE Multi Scale DCC Main Bus Wire Black 50'

Layout Wiring Kit, 100 Foot DCC power bus. DCC main bus wiring for typical 100 foot double track mainline. Includes: • Main Bus - 100 feet each red and black 14 AWG stranded wire • Feeder Wires - 32 each red and black feeder 22 AWG wires...

Same six-wire connectors in front as UTP but allows use of off-the-shelf CAT5 cables to connect panel-to-panel at rear. Can be used as a cab bus splitter and also adds the ability to add power to the cab bus for larger layouts.

The AR10 is an automatic reverse loop controller for DCC layouts. It requires just 4 connections, two to the main line and two to the loop. In addition it functions as a circuit breaker for the reverse loop. Recommended for DCC systems from 1 to 10Amps.

Build your control panels with greatly simplified wiring. Just connect push buttons to the Mini Panel and use to issue turnout routing macros, individual turnout commands by pushing one button. Set up is easy, just plug in a Pro Cab (sold separately) and...

Provides short circuit protection for one power district. Can be used with most DCC systems.  This is not recommended for use with the PowerCab. For the PowerCab use a CP6!

Add this USB computer interface for computer programming and/or operation of your Power Cab equipped layout. Requires USB cable, computer and railroad computer program such as JMRI Decoder Pro and Panel Pro

Add a separate PCP panel to operate your PowerCab in other places or on other layouts. Use the P114 and you will only have to move the PowerCab.

13.8v DC Power Supply. 1.3 Amp / 2 amp peak. US approved power supply suitable for PowerCab and other applications. This plugs into the back of panels such as the PCP(PowerCab connection panel) and the UTP-CAT5