DCC Accessories

The SoundTraxx CurrentKeeper™ is designed to add additional power capacity to any decoder installation. It can be used to overcome dirty track, limited electrical pickup or dead frogs to ensure reliable operation of any locomotive in your fleet...

This harness easily converts TSU-2200 or ECO-200 Digital Sound Decoders to plug and play decoders for use with models equipped with an NMRA 8-pin socket.

Golden White LEDs for adding or using the Hyperlight lighting effects. Can be used as LED replacements or in place of bulbs (see your decoder manual). The cathode or minus (-) side is indicated by the ‘flag’ inside the...

Sunny White LEDs for adding or using the Hyperlight lighting effects. Can be used as LED replacements or in place of bulbs (see your decoder manual). The cathode or minus (-) side is indicated by the ‘flag’ inside the...

The DBX-9000 is a compact 9-wire connector and harness assembly for use with universal-style DCC decoders. It is designed to simplify the wiring connection between a steam locomotive and its tender, providing a quick-disconnect for...

Replacement 9-wire to JST power harness for all TSU-2200 or ECO-200 Digital Sound Decoders.

This assortment includes 6" each of 1/16", 3/32", 1/8" and 1/4" diameter tubing for insulating solder connections.

These 2-pin connectors allow locomotive wiring to be quickly disconnected for easier painting and servicing. This kit includes a 2-pin connector set, 6" of red wire, 6" of black wire, and four pieces of heat-shrink tubing.

For use with DCC systems

For use with DCC systems

Houses 6 PL-26 Passing Contact Switches, PL-22 On/Off Switches or PL-23 On/On Switches. Recommended to be used with: PL-26 Passing Contact Switches PL-22 On/Off Switches PL-23 On/On Switches PECO Multi Scale Switch Console

The Decoder Buddy V5 and V5B were developed for the 12 output decoders and include a couple added features. This mother board does not include the 21-Pin Decoder. This mother board requires soldering. This printed circuit board is NOT INTENDED FOR USE IN...

Features Adjustable width will hold cans as well as larger drink cups Folds flat when not in use to save space Includes four black wood screws Black textured finish matches our Universal Throttle Pocket™ Made from durable ABS plastic...

Features Adjustable width will hold cans as well as larger drink cups Folds flat when not in use to save space Includes four black wood screws Black textured finish matches our Universal Throttle Pocket™ Made from durable ABS plastic...

Keep Throttles Off Layout Scenery with Throttle Pockets™ During layout operating sessions modelers are always looking for a place to set down their throttles. Universal Throttle Pockets from New Rail Models offer a convenient alternative to...

Keep Throttles Off Layout Scenery with Throttle Pockets™ During layout operating sessions modelers are always looking for a place to set down their throttles. Universal Throttle Pockets from New Rail Models offer a convenient alternative to...

Part Number5240299 Dimensions100ft of 20mm (.787) NCEKAP20 100ft of 20mm (.787) Kapton Tape Polyimide Film Tape consists of Kapton® polyimide film and silicon adhesive. It is designed for high temperature applications. Temperature use range is -100...

Part Number5240298 Dimensions100ft of 10mm (.393) NCEKAP10 100ft of 10mm (.393) Kapton Tape Polyimide Film Tape consists of Kapton® polyimide film and silicon adhesive. It is designed for high temperature applications. Temperature use range is -100...

Same six-wire connectors in front as UTP but allows use of off-the-shelf CAT5 cables to connect panel-to-panel at rear. Can be used as a cab bus splitter and also adds the ability to add power to the cab bus for larger layouts.

The AR10 is an automatic reverse loop controller for DCC layouts. It requires just 4 connections, two to the main line and two to the loop. In addition it functions as a circuit breaker for the reverse loop. Recommended for DCC systems from 1 to 10Amps.