DCC Decoders

1k ohm resistors The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications.  There has also been interest in HOn3 and S-Gauge applications. This mother board does not include the 21 Pin Decoder. This mother board...

The Blunami BLU-2200The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use...

The Blunami BLU-2200The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use...

The Blunami BLU-2200The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use...

The Blunami BLU-2200The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use...

The Blunami BLU-2200The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use...

The Blunami BLU-2200The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use...

The Blunami BLU-2200The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use...

This decoder is designed specifically to meet the needs of European HO-Scale modelers. This decoder is compliant with the NEM660 standard found in locomotives equipped with the MTC 21-pin socket. The EU series decoders are compatible with all of TCS'...

This hardwire decoder is the smallest decoder with built in Keep-Alive™ that we produce. It will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). While physically larger than a...

The T4 is a multi-purpose HO-scale decoder. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. The on-board resistors on this decoder allow for LED installations without the need for external resistors for F0F,...

This decoder is a M4 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a M-series decoder, but...

This decoder is a T6 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a T-series decoder, but...

This full featured 6 function BEMF decoder fits the following Atlas HO Scale engines: S1, S2, S3, and S4. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor...

The K4-LK is a function-only lighting expansion board which has been designed to be installed into the KATO N-scale MP36PH. This board has three hookup wires - One RED Anode(+) wire (center) and two GREEN function wires(-). Simply solder the wires to...

The LL8 is a 8-function direct-plug decoder designed specifically to meet the needs of LifeLike/Proto 2000 models. The LL8 can quickly be swapped for the existing DC board in your model, making the installation process fast and simple. The LL8 has a...

The CN is a N-scale drop-in decoder for older Atlas, Kato, and Intermountain locomotives. Examples include the following: Atlas: GP7/GP9 Old Style GP30/GP35 Old Style SD35/SD50/SD60/SD60M B30-7/B40-8 GP38 GP40 DCC-Ready SD9...

The A6X is six function HO-scale "drop-in" style mobile decoder with integrated 1.5V power supply for Atlas, Athearn, Kato, etc. locomotives. Examples include the following: Athearn: F59PHI F3 Atlas: RS-1/RS-3/RS-11 C424 GP7 Kato: GP35 Back...

The T4X is a multi-purpose HO-scale decoder. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. The T4X may be used in locomotives which have ditch lights in addition to forward and reverse headlights. Note: As...

The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all characteristics, however, the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility comes with a cheaper price. LokPilot...