DCC Decoders

 The LokSound 5 micro DCC Direct has been specially developed for installation in Spur N vehicles of the Atlas and Intermountain brands: it can be inserted directly instead of the analog board installed there as standard. However, the decoder can...

 The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into...

 The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into...

Decoder tester (Replaces 51900), NEM651, NEM652, 21MTC, PluX22, Next18, single wires. With motor, LED-Monitor and 20mm speaker. New socket to accept decoder tester extension 53901Â Perhaps you are familiar with this scenario: there is a digital decoder...

LokProgrammer set: LokProgrammer unit, US 110V power supply, and serial to USB PC cable Dimensions: 95mm (3.74") x 85mm (3.35") x 22mm (0.87")   You want to listen to the sound spectrum of your favourite loco, or the special sound of that loco...

The ESU SignalPilot decoder is a multi-protocol decoder designed primarily for switching daylight signals. It has 16 outputs to which micro lamps or LEDs (with series resistors) can be connected directly. Because all outputs are designed as push/pull...

If required, SwitchPilot can be augmented with the SwitchPilot Extension Modul: Plugged in at the side of the SwitchPilot, it offers four relay-driven outputs, used for switching potential-free loads, or for polarizing the frog; the ideal supplement for...

Board replacement SoundFX®/motor/FX3 function decoder for N Scale Atlas SD50/60 diesels Board replacement decoder for N Scale Atlas SD50/60 diesels Preloaded with our SD50/60 sound scheme 4 FX3 Functions Visit Digitrax Sound Depot...

Fits Many DCC-Ready Z, N and HO Scale Locomotives Size: .55” x .4” x .148”14mm x 10.23mm x 3.77mm Z/N/HO Scale 1.0 Amp/1.5 Amps Peak 4 FX3 Functions, 0.5 Amp DCC Medium Plug with 1 ‘ Harness   FX3 Function...

Series 6 Features 4 FX3 Functions .386” x .559” x .137”9.8mm x 14.2mm x 3.48mm Fits Many N and HO Locomotives

Wired Motor & Function Decoder that fits many N and HO Scale Locos. Size: .55” x .4” x .148”14mm x 10.23mm x 3.77mm Z/N/HO Scale 1.0 Amp/1.5 Amps Peak 4 FX3 Functions, 0.5 Amp   FX3 Function outputs for...

All the great features and reliability of Digitrax decoders in a tiny package that will fit almost anywhere! 0.55" x 0.28" x 0.128" (14 x 7.13 x 3.25 mm) Works with Z, N, and HO scale locos 1 Amp/1.25 Amps Peak Motor Current Rating Digitrax...

Fits Many Z, N and HO Scale Locomotives Size: .455” x .369” x .126”11.56mm x 9.37mm x 3.2mm Z, N and HO Scale 1.0 Amp/1.5 Amps Peak 2 FX3 Functions, 0.5 Amp DCC Medium Plug with 1 ‘ Harness FX3 Function outputs for...

Fits Many Z, N and HO Locomotives with 6 Pin NEM 651 type plug Size: .36” x .42” x .13”9.05mm x 10.61mm x 2.67mm N Scale 1.0 Amp/1.5 Amps Peak 2 FX3 Functions, 0.5 Amp with 6 Pin NEM 651 type plug   FX3 Function...

Fits Many Z, N and HO Scale Locomotives Size: .455” x .369” x .126”11.56mm x 9.37mm x 3.2mm Z/N/HO Scale 1.0 Amp/1.5 Amps Peak 2 FX3 Functions, 0.5 Amp   FX3 Function outputs for prototypical lighting effects and on/off...

Board Replacement Decoder for American Z Line (AZL) GP-30 Diesels and others.  1 Amp with 2 FX3 Functions.   Specifications Current Rating-Motor 1.0 Amp/1.25 Amps Peak Size 0.271” x 1.296” x .099” (6.8834mm x 32...

Digitrax LocoMotion® SystemYour locomotives look like the real thing. The Digitrax LocoMotion™ System makes them run like the real thing, too!   Torque Compensation for smooth as silk silent operation. 128 Speed Step operation...

Board Replacement Decoder for Marklin Z 88584 and others. 1 Amp with 2 FX3 Functions.

Board Replacement Decoder for Marklin Mini Club 88455 and others.  1 Amp with 2 FX3 Functions.

Features: This 2 function FX3 decoder is designed to fit MicroTrains Z scale GP-35 locos.  128 Speed Step operation (14 or 28 steps can also be used) Momentum with acceleration and deceleration. Normal Direction of Travel is user selectable. 3...