It works with most rigid foams including polystyrene foams, like Styrofoam, white beaded EPS foam, and XPS foams (blue and pink board). Foam Fusion bonds foam to almost any porous surface and is easy to apply – simply brush or squeegee on. Apply a very thin layer on each side – it goes a long way. Available in 4 sizes.
Hot Wire Foam Factory tools will cut through this glue.
What customers are saying: “I tried the sample of Foam Fusion, looked at it, and thought I could substitute Elmer’s glue for it. When I did my project, I was very sorry I tried the substitution. Two weeks later, the foam pieces were falling apart with the white glue being totally wet like when I poured it. I had the HWFF people explain that Elmer’s (or plain white glue) is air dry, while Foam Fusion is a chemically drying product. I will never make that mistake again, and I wish I had the two wasted weeks back!” – Michael Kerschner, Professional Haunt Builder, Amherst, OH
Available in 4 sizes:
Coverage: (Best to squeegee on a thin layer on both sides. A roller applies too much glue)
8 oz = 50 square feet (25 square feet x 2 sides)
16 oz = 100 square feet (50 square feet x 2 sides)
32 oz = 200 square feet (100 square feet x 2 sides)
1 gal = 800 square feet (400 square feet x 2 sides)
Instructions for use with XPS: XPS foam (blue and pink board) sometimes has a plastic “skin” on it, and that will have to be removed before gluing. Sometimes the plastic can be easily peeled off, otherwise lightly sanding the surface should remove enough of the plastic to allow the glue to grip the foam.
WARRANTY: HWFF Inc./dba Hot Wire Foam Factory warrants this product to be of merchantable quality when used or applied in accordance with the instructions herein. The product is not warranted as suitable for any purpose or use other than the general purpose for which it is intended. Liability under this warranty is limited to the replacement of its product (as purchased) found to be defective, or at the shipping companies’ option, to refund the purchase price. In the event of a claim under this warranty, notice must be given to The Hot Wire Foam Factory in writing. This limited warranty is issued and accepted in lieu of all other express warranties and expressly excludes liability for consequential damages. MSDS available on request.
Hot Wire Foam Factory
Foam Fusion – 16oz