DCC & DC

The T1 LED has added Blue and Black/White wires for the use of a KeepAlive device. This decoder has internal resistors for LEDs eliminating the use of external resistors for F0F or F0R. This decoder may be hard-wired or plugged directly into any...

The AZL1D4 is the first drop-in decoder designed for the latest generation of American Z Line diesel locomotives. The design features a screw-down design, unlike previous designs which relied on slide-on contacts. Examples of locomotives which this...

This full-featured, 4 function, drop-in decoder is designed to fit in American Z Lines modern diesel chassis. Some of the AZL locomotive it fits in includes: SD70, SD70M, SD75I, SD75M, GP9, GP38-2 and more. This decoder includes built-in forward and...

This full featured 2 function BEMF decoder is designed specifically to meet the needs of Z and N-Scale modelers who are converting their Z and N-Scale locomotives to DCC. Included is our auto-adjusting BEMF for outstanding slow speed performance and...

This decoder is compatible with the NEM651 standard interface found in some N-scale Bachmann and Fox Valley Models locomotives. The EUN651P-18 is wired to a 18mm harness terminated in a 6-pin NEM plug. Back EMF Load Compensation:Provides superior slow...

This decoder is compatible with the NEM651 standard interface found in some N-scale Bachmann and Fox Valley Models locomotives. The EUN651P-30 is wired to a 30mm harness terminated in a 6-pin NEM plug.   Back EMF Load Compensation:   Provides...

This full featured 2 function BEMF decoder is designed specifically to meet the needs of Z and N-Scale modelers who are converting their Z and N-Scale locomotives to DCC. Included is our auto-adjusting BEMF for outstanding slow speed performance and...

This full featured 2 function BEMF decoder is designed specifically to meet the needs of Z and N-Scale modelers who are converting their Z and N-Scale locomotives to DCC. Included is our auto-adjusting BEMF for outstanding slow speed performance and...

This full featured 2 function BEMF decoder is designed specifically to meet the needs of Z and N-Scale modelers who are converting their Z and N-Scale locomotives to DCC. Included is our auto-adjusting BEMF for outstanding slow speed performance and...

The Z2 is the smallest DCC decoder available! This direct-plug decoder has 2 lighting fuctions and enough current capacity to operate up to HO-scale locomotives! This decoder is designed for Z-Scale locomotives, or specialty installations in larger...

NOTE: This product is intended for use with N-scale decoders and locomotives. TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA-N1 can power an...

The LokPilot 5 Nano DCC is the “twin” of the LokSound 5 Nano DCC. At 19.6 mm x 8.5 mm and a thickness of only 3.2 mm, it is exactly the same size as the corresponding LokSound decoder, but does without the sound functions. The LokPilot 5 Nano...

8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 For Kato N P42 and similar 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma Output 8 Ohm 13mm round Speaker 100uF Capacitor

8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 For for Kato 4-8-4 FEF-3 and similar Drop-in light board replacement 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma Output 8 Ohm 9x18x4 mm oval speaker 100uF Capacitor

8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 For Kato SD80 MAC and similar 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma Output 8 Ohm 9x18x4 mm oval speaker 100uF Capacitor

8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 For Kato SD40-2 and similar Drop-in light board replacement 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma Output 8 Ohm 9x18x4 mm oval speaker 100uF Capacitor

2 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax Easy Connect 8 Pin Harness Motor 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB...

8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax Easy Connect 8 Pin Harness Motor 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB...

The LokSound 5 micro DCC Direct Kato USA Widebody has been specially developed for installation in wide body N gauge locomotives of the Kato USA brand: Most diesel locomotives of this manufacturer come with only a common DC lighting board. Finally, these...

The LokSound 5 micro DCC Direct has been specially developed for installation in N gauge locomotives of the Atlas and Intermountain brands: it can be inserted directly instead of the analog board installed there as standard. However, the decoder can also...