DCC & DC

  Board replacement Decoder for Kato N Scale MP36PH Metra 

  Board Replacement Decoder for Kato N-Scale Glacier Express 1.5 Amp/2.0 Amps Peak Motor Current Rating 6 FX3 Functions-500mA Function Current Rating

 Board Replacement Decoder for Kato N-Scale E5 1.5 Amp/2.0 Amps Peak Motor Current Rating 6 FX3 Functions-500mA Function Current Rating Note: DN163K0A will not fit in the new E5 locos.

 Features: Designed to fit the Kato N scale F40PH Decoder Lock equipped

  Replaces DN163A2 Board Replacement Decoder for Atlas N Scale GP7, GP9 and GP15-1, GP30, GP35 and similar locos Decoder Lock equipped

 Fits Many DCC-Ready N and HO Scale Locomotives Size: 1.158” x .386” x .115” 29.43mm x 9.81mm x 2.98mm N Scale 1.0 Amp/1.5 Amps Peak FX3 Function outputs for prototypical lighting effects and on/off control: Constant Brightness Lighting...

 Features: DN143K2 makes installation possible though it is somewhat challenging because of the model itself. If you use reasonable care, you will be able to handle this installation. RDC Special Lighting: 3 light boards included with decoder,...

 Fits Many N/HO Locomotives with 8 pin Medium Socket Size: .55” x .404” x .2” 13.9mm x 10.3mm x 5 mm N/HO Scale Digitrax Easy Connect 8 Pin Harness 1.0 Amp/1.5 Amps Peak 3 FX3 Functions, 0.5 Amp FX3 Function outputs for prototypical...

 Wired Motor & Function Decoder that fits many N and HO Scale Locos. Size: .55” x .404” x .2” 13.9mm x 10.3mm x 5 mm N/HO Scale 1.0 Amp/1.5 Amps Peak 3 FX3 Functions, 0.5 Amp FX3 Function outputs for prototypical lighting effects and...

  Digitrax LocoMotion™ System Your locomotives look like the real thing. The Digitrax LocoMotion™ System makes them run like the real thing, too!Torque Compensation for smooth as silk silent operation. 128 Speed Step operation (14 or 28 steps...

 Digitrax 9 pin to DCC medium plug short harness (1”)

Dual 3/5/8 Amp AutoReversing DCC Booster Up to 16 Amps of power total N, HO, & Large Scale Operations with Custom Voltage Trim LocoNet for easy plug ‘n play installation and system expansion Easy dip switch setup Auto resetting over...

Single 3/5/8 Amp AutoReversing DCC Booster (no command station capability) Up to 8 Amps of power total N, HO, & Large Scale Operations with Custom Voltage Trim LocoNet for easy plug ‘n play installation and system expansion Easy dip switch...

 The BXPA1 is a combination DCC Auto-Revereser, occupancy detector, Transponding detector, and intelligent power manager. It is designed to make transponding implementation easy and provide advanced DCC track management by communicating all state...

 BXP88 makes adding detection and transponding to your layout easier than ever.  No more complicated wiring! DCC Occupancy Detection supports up to 8 Detection Sections letting you know when equipped rolling stock is in a detection section...

 The BDL168 is a cost effective LocoNet Occupancy Detector for 16 detection sections. Lets you know when detection sections of your layout are occupied.When used in conjunction with one or two RX4 transponder detectors it operates up to 8...

  Low-cost, High-sensitivity DCC block-occupancy detection. Adjustable resistance/current detection section (DS) trip threshold. 8A capacity, suitable for all scales and track wiring configurations. Noise resistant and compatible with...

 AR1 Features: Cost effective automatic reversing for one reversing section or subdistrict User selectable trip current lets you adjust the AR1 to work with any scale or equipment on your layout Auto-Reversing manages polarity...

 Decoder Wire for decoder, lighting & signal installation 90ft 32AWG stranded wire-10 ft lengths in 9 colors

Zen ZNSSA SUPER high power stay alive has exceptional power storage. In fact, once charged, they have enough power to run an average OO or HO Locomotive more than two metres with the track power removed! ZNSSA Stay Alive is the natural partner for your...