- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
RR-CirKits, Inc CT-Coil - Coil, current sensing, 20 mH/1 ohm DCR - Multi Scale
$2.39Single CT (Current Transformer) coil. -
RR-CirKits, Inc CT-coil-set-4 - Coils, current sensing, set of 4 - Multi Scale
$7.49Set of 4 CT (Current Transformer) coils for BOD4 or BOD4-CP. -
RR-CirKits, Inc CT-coil-set-8 - Coils, current sensing, set of 8 - Multi Scale
$14.50Set of 8 CT (Current Transformer) coils for BOD-8. These 100:1 toroid coils sense the track current on leads passing through the hole in the middle of the coil. They connect to the BOD-8 with twisted pair cable such as CAT-3 or CAT-5 network cable. (up... -
RR-CirKits, Inc BOD-4 - 4 Block DCC Occupancy Detector, DCC Only, Rev D - Multi Scale
$20.55(Block Occupancy Detector-4) This board operates as a DCC occupancy detector for 4 blocks using remote CT coils. It outputs logic levels, and has a RR-CirKits standard ribbon connector interface. The "Power-Lok" feature optionally monitors the DCC bus... -
RR-CirKits, Inc BOD-8-SM - 8 Block DCC Occupancy Detector, DCC Only, Sample Mode compatible - Multi Scale
$38.54(Block Occupancy Detector-8 - SM) This new board is compatible with LCC node sample mode which allows using output drivers on the same I/O port. This board operates as a DCC occupancy detector for 8 blocks using remote CT coils. It outputs logic levels,... -
RR-CirKits, Inc UN8-BE - USB to Serial DB9 cable, 6 ft. - Multi Scale
$24.15USB to serial Interface unit. Includes driver disk. Well suited for interfacing NCE Power Pro command station to USB.This unit does not require any modifications to the command station for proper attachment. Note: Not for Power Cab, nor for Smart Booster... -
RR-CirKits, Inc Signal-LCC-P - Signal LCC Board with IDC Pin connections - Multi Scale
$59.9016 Led drivers plus 8 line Input/Output node for NMRA CAN bus LCC®. Logic level I/O port compatible with other standard RR-CirKits I/O modules. Boot Loader for user installable firmware upgrades. Includes powerful internal Logic Elements. Compatible with... -
RR-CirKits, Inc Signal-LCC-S - Signal LCC Board with screw terminal connections - Multi Scale
$59.9016 Led drivers plus 8 line Input/Output node for NMRA CAN bus LCC®. Logic level I/O port compatible with other standard RR-CirKits I/O modules. Boot Loader for user installable firmware upgrades. Includes powerful internal Logic Elements. Compatible with... -
RR-CirKits, Inc LCC-Starter-Kit - Includes LCC-Buffer-USB, LCC-Power-Point, LCC Terminator-pair, LCC cable 1 ft - Multi Scale
$80.96LCC Starter Kit Includes an LCC Buffer-USB, a Power-Point, 2 Terminators, includes 1' LCC cable and USB cable. -
RR-CirKits, Inc LCC-BUFFER-USB - LCC Buffer-USB, NMRA CAN bus LCC to USB Interface - Multi Scale
$56.66LCC Buffer-USB Features: • NMRA CAN bus LCC® to USB interface. • 2,500 Volt High Speed Digital isolation between CAN bus LCC® and USB port. • Simplify your LCC configuration and/or use a PC based CTC... -
ESU 59826 - LokPilot 5 micro DCC, 6-pin NEM651 - N Scale
$31.27The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a... -
ESU 59824 - LokPilot 5 micro DCC, PluX16 - N Scale
$31.27The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a... -
ESU 59820 - LokPilot 5 micro DCC, 8-pin NEM652 - N Scale
$31.27The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a... -
ESU 59659 - LokPilot 5 DCC, 21MTC MKL - HO Scale
$30.55The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all characteristics, however, the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility comes with a cheaper price. LokPilot... -
ESU 59626 - LokPilot 5 DCC, 6-pin NEM651 - HO Scale
$30.55The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all characteristics, however, the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility comes with a cheaper price. LokPilot... -
ESU 59620 - LokPilot 5 DCC, 8-pin NEM652 - HO Scale
$30.55The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all characteristics, however, the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility comes with a cheaper price. LokPilot... -
ESU 58219 - LokSound 5 Fx DCC/MM/SX/M4 »Blank decoder«, 21MTC NEM660, with loudspeaker 11x15mm - HO Scale
$67.71The LokSound 5 Fx is a special feature of the LokSound family: it has no output and is specially designed for use in control cars or drive heads, which require a sound but do not have a model drive themselves. By omitting the engine part, it can still... -
ESU 58210 - LokSound 5 Fx DCC/MM/SX/M4 »Blank decoder«, 8-pin NEM652, with loudspeaker 11x15mm - HO Scale
$67.71The LokSound 5 Fx is a special feature of the LokSound family: it has no output and is specially designed for use in control cars or drive heads, which require a sound but do not have a model drive themselves. By omitting the engine part, it can still... -
ESU 58814 - LokSound 5 micro DCC/MM/SX/M4 "blank decoder", PluX16, with Speaker 11x15mm - Multi Scale
$114.23The LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All LokSound... -
ESU 58818 - LokSound 5 micro DCC/MM/SX/M4 "blank decoder", Next18, with Speaker 11x15mm - Multi Scale
$114.23The LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All LokSound...