DCC & DC

Fits many HO, O & G Scale installations. 53mm x 18mm x 14mm. 8 Ohms, 1/2 watt ratings. Acoustically matched enclosure included for best sound level. For use with decoders that specify 8 Ohm speakers.

Fits many HO, O & G Scale installations. 53mm x 18mm x 14mm. 32 Ohm, 1/2 watt rating. Acoustically matched enclosure included for best sound level. For use with decoders that specify 32 Ohm speakers.

SP28288 - Round 28mm 8 Ohm Speaker with wires.Great for HO installations. Used on current production SFX0416 sound and function decoder. Digitrax recommends the use of a baffle or speaker enclosure with this speaker for maximum sound output.

SP282832 - Round 28mm 32 Ohm Speaker with wires. Great for HO installations. Used on current production SFX004, SFX064D, SDH164D & SDH164K1A sound decoders. Digitrax recommends the use of a baffle or speaker enclosure to maximize sound output when...

Ready to install in compatible locomotive motherboards 26.5mm X 15.5mm X 9mm Rated at 8 Ohm Rated at 1/2 Watt  

Ready to install in compatible locomotive motherboards 26.5mm X 15.5mm X 9mm Rated at 8 Ohm Rated at 1/2 Watt

Round 13mm 8 Ohm Speaker with wires. Fits many N & HO Scale installations.Used on current production SDN144K0A and SDN144K1E sound decoders. Digitrax recommends the use of a baffle or speaker enclosure for maximum sound output when using this...

UR93 Features: Digitrax Duplex Radio Transceiver on LocoNet wire infrastructure (no IR support). More than double the radio range of UR92 Duplex units. Improved multi-path performance for cluttered layouts. Plug and Play setup, PS14 Universal power...

Board replacement SoundFX®/motor/FX3 function decoder for N Scale Atlas SD50/60 diesels Board replacement decoder for N Scale Atlas SD50/60 diesels Preloaded with our SD50/60 sound scheme 4 FX3 Functions Visit Digitrax Sound Depot...

  Materials for making 2 Signal Driver Cables for SE8C. Includes 30’of 10-wire Signal Driver ribbon cable & 8 10-Pin sockets.   Use this kit to make signal driver cables to connect your SE8c to the signals on the railroad. Make the cables...

 RD2 Remote Sensing Diodes for BDL16 series occupancy detectorsRemote sensing of 2 detection sections. Eliminates the need for long runs of heavy gauge wire between the BDL168, BDL16 & BDL162 and remotely located track sections. 

  Keeps locos running during power interruptions caused by dirty or bad track. Keeps light and other functions from dropping out due to power interruptions. Hold up time varies based on decoder load & track conditions. Use with Digitrax...

  Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. Use with Digitrax Series 6 Decoders with 6 pin sound harnesses such as SDN136PS &...

  Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. PX112-2 Plug ‘N Play Install on DH126 & DH166 Series Decoders PX Body Size 1...

  Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. Use with Digitrax Series 6 Decoders with 10 pin sound harnesses such as SDH166D &...

  For use with Digitrax Decoders Equipped with 6 pin Function Harness Keeps locos running during intermittent power interruptions resulting from dirty or bad track. 0.33 F Capacitance Use on 10-18V Track Power Hold up time varies...

  For use with Digitrax Decoders Equipped with 6 pin Function Harness 8 ohm 10x18 mm Oval speaker included. Keeps locos running during intermittent power interruptions resulting from dirty or bad track. 0.33 F Capacitance Use on...

  For use with Digitrax Decoders Equipped with 6 pin Function Harness 8 ohm 16 x 26 x 9 mm box speaker included Keeps locos running during intermittent power interruptions resulting from dirty or bad track. 0.33 F Capacitance ...

  For use with Digitrax Decoders Equipped with 2 pin PX socket or solder pad connections Keeps locos running during intermittent power interruptions resulting from dirty or bad track. 0.33 F Capacitance Use on 10-18V Track Power Hold...

 PS615 90W AC/DC 15VDC 6 amp power supply for use with all Digitrax Command Stations and Boosters operating at 5 amps. High-efficiency power supply 15 VDC output Accepts different cord sets Meets MEPS VI and DOE VI efficiency standards CE...