DCC & DC

This M4 decoder (see M4 for more information) comes connected to a 5" (12.7 cm) long harness which is terminated with a 8-Pin NMRA plug. From M4 listing 1011 Back EMF Load Compensation: Provides superior slow speed control and high performance...

A full featured, 4 function, 3.5" (88.9mm) harnessed decoder with a built in Keep-Alive™. The built-in Keep-Alive™ will keep your locomotive operating for 6-15 seconds without power (dirty track, bad contact, etc. etc.). Included is our...

This decoder is a M4 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a M-series decoder, but...

This decoder is compatible with the NEM651 standard interface found in some N-scale Bachmann and Fox Valley Models locomotives. The EUN651P-18 is wired to a 18mm harness terminated in a 6-pin NEM plug. Back EMF Load Compensation:Provides superior slow...

This decoder is compatible with the NEM651 standard interface found in some N-scale Bachmann and Fox Valley Models locomotives. The EUN651P-30 is wired to a 30mm harness terminated in a 6-pin NEM plug.   Back EMF Load Compensation:   Provides...

This full featured 2 function BEMF decoder is designed specifically to meet the needs of Z and N-Scale modelers who are converting their Z and N-Scale locomotives to DCC. Included is our auto-adjusting BEMF for outstanding slow speed performance and...

This full featured 2 function BEMF decoder is designed specifically to meet the needs of Z and N-Scale modelers who are converting their Z and N-Scale locomotives to DCC. Included is our auto-adjusting BEMF for outstanding slow speed performance and...

This full featured 2 function BEMF decoder is designed specifically to meet the needs of Z and N-Scale modelers who are converting their Z and N-Scale locomotives to DCC. Included is our auto-adjusting BEMF for outstanding slow speed performance and...

The Z2 is the smallest DCC decoder available! This direct-plug decoder has 2 lighting fuctions and enough current capacity to operate up to HO-scale locomotives! This decoder is designed for Z-Scale locomotives, or specialty installations in larger...

This product is used with the LT-50 "Layout Throttle." This panel can be used to create a DCC track output when used with an LT-50 using the specified jack. A single additional wired LCC throttle can be connected to the front of the panel, and this...

The LT-50 "Layout Throttle" is an intelligently-designed wired LCC throttle with a built-in command station. Ergonomically designed to comfortably fit your hand and provide easy access to all of the buttons, the LT-50 is the perfect DCC command station...

The B-106 is an intelligently-designed DCC Auxiliary Booster with LCC integration as well as a built-in RailCom® detector. Thoughtfully designed to outperform in every area, the B-106 is the perfect for layout builders or renovators looking for a...

The CS-105 is an intelligently-designed DCC command station with LCC integration as well as a built-in RailCom® detector. Thoughtfully designed to outperform in every area, the CS-105 is the perfect DCC command station for newcomers, or layout...

The BA-100 “Booster Adapter” is a product which can be used to connect different manufacturers’ DCC boosters (and command stations) together. This product is intended to offer a quick and easy way to “plug and play”...

This product is an expansion panel for an LCC network, such as those created and used by the CS-105 and LT-50. Use this product to expand the number of wired throttles such as the T-50 you can connect to the TCS command station, or to provide an access...

NOTE: This product utilizes a specific plug harness which may not be compatible with all decoders. TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work...

NOTE: This product utilizes a specific plug harness which may not be compatible with all decoders. TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work...

NOTE: This product utilizes a specific plug harness which may not be compatible with all decoders. TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work...

NOTE: This product utilizes a specific plug harness which may not be compatible with all decoders. TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. This...

This custom-designed holder can hold a single TCS UWT-100 throttle. Includes: 1 - 3D printed holder designed perfectly for the UWT-100 1 - Bag of 2 Screws