DCC & DC

Round 13mm 8 Ohm Speaker with wires. Fits many N & HO Scale installations.Used on current production SDN144K0A and SDN144K1E sound decoders. Digitrax recommends the use of a baffle or speaker enclosure for maximum sound output when using this...

UR93 Features: Digitrax Duplex Radio Transceiver on LocoNet wire infrastructure (no IR support). More than double the radio range of UR92 Duplex units. Improved multi-path performance for cluttered layouts. Plug and Play setup, PS14 Universal power...

Board replacement SoundFX®/motor/FX3 function decoder for N Scale Atlas SD50/60 diesels Board replacement decoder for N Scale Atlas SD50/60 diesels Preloaded with our SD50/60 sound scheme 4 FX3 Functions Visit Digitrax Sound Depot...

  Materials for making 2 Signal Driver Cables for SE8C. Includes 30’of 10-wire Signal Driver ribbon cable & 8 10-Pin sockets.   Use this kit to make signal driver cables to connect your SE8c to the signals on the railroad. Make the cables...

 RD2 Remote Sensing Diodes for BDL16 series occupancy detectorsRemote sensing of 2 detection sections. Eliminates the need for long runs of heavy gauge wire between the BDL168, BDL16 & BDL162 and remotely located track sections. 

  Keeps locos running during power interruptions caused by dirty or bad track. Keeps light and other functions from dropping out due to power interruptions. Hold up time varies based on decoder load & track conditions. Use with Digitrax...

  Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. Use with Digitrax Series 6 Decoders with 6 pin sound harnesses such as SDN136PS &...

  Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. PX112-2 Plug ‘N Play Install on DH126 & DH166 Series Decoders PX Body Size 1...

  For use with Digitrax Decoders Equipped with 6 pin Function Harness Keeps locos running during intermittent power interruptions resulting from dirty or bad track. 0.33 F Capacitance Use on 10-18V Track Power Hold up time varies...

  For use with Digitrax Decoders Equipped with 6 pin Function Harness 8 ohm 10x18 mm Oval speaker included. Keeps locos running during intermittent power interruptions resulting from dirty or bad track. 0.33 F Capacitance Use on...

  For use with Digitrax Decoders Equipped with 6 pin Function Harness 8 ohm 16 x 26 x 9 mm box speaker included Keeps locos running during intermittent power interruptions resulting from dirty or bad track. 0.33 F Capacitance ...

  For use with Digitrax Decoders Equipped with 2 pin PX socket or solder pad connections Keeps locos running during intermittent power interruptions resulting from dirty or bad track. 0.33 F Capacitance Use on 10-18V Track Power Hold...

 PS615 90W AC/DC 15VDC 6 amp power supply for use with all Digitrax Command Stations and Boosters operating at 5 amps. High-efficiency power supply 15 VDC output Accepts different cord sets Meets MEPS VI and DOE VI efficiency standards CE...

 The PS14 is a 300ma, 14 Volt power supply for powering Digitrax accessories like the UP5, BDL168, DS64, SE8C, LNRP, UR90, UR91 UR92 and others  Universal AC input 95-240V 50/60Hz  US 2 prong plug, in sideways orientation to fit...

Everything you need to get started with Advanced Digitrax Command Control. Evolution Express is perfect for most home and club layouts. It offers excellent speed control, prototypical consisting, the full range of programming features and much more...

Series 6 Features 4 FX3 Functions .386” x .559” x .137”9.8mm x 14.2mm x 3.48mm Fits Many N and HO Locomotives

Wired Motor & Function Decoder that fits many N and HO Scale Locos. Size: .55” x .4” x .148”14mm x 10.23mm x 3.77mm Z/N/HO Scale 1.0 Amp/1.5 Amps Peak 4 FX3 Functions, 0.5 Amp   FX3 Function outputs for...

Fits Many Z, N and HO Scale Locomotives Size: .455” x .369” x .126”11.56mm x 9.37mm x 3.2mm Z, N and HO Scale 1.0 Amp/1.5 Amps Peak 2 FX3 Functions, 0.5 Amp DCC Medium Plug with 1 ‘ Harness FX3 Function...

Fits Many Z, N and HO Scale Locomotives Size: .455” x .369” x .126”11.56mm x 9.37mm x 3.2mm Z/N/HO Scale 1.0 Amp/1.5 Amps Peak 2 FX3 Functions, 0.5 Amp   FX3 Function outputs for prototypical lighting effects and...

Board Replacement Decoder for American Z Line (AZL) GP-30 Diesels and others.  1 Amp with 2 FX3 Functions.   Specifications Current Rating-Motor 1.0 Amp/1.25 Amps Peak Size 0.271” x 1.296” x .099” (6.8834mm...