DCC & DC

0001325 Throttlepack Handheld 9900/9950 Instruction Manual

The Throttlepack 9950 can operate in three different settings: Standard DC Power Pack Operation LGB MFX Equipped DCC Equipped for a NMRA compatible decoder When you power up the 9950 it starts in regular DC power pack mode. The 9950 offers...

The Throttlepack 9900 replaces MRC's Trainpower 6200 (AA222) with a complete revamp and new circuitry. The Throttlepack 9900 operates more efficiently and under cooler temperatures. Rated at 80 watts (5.5 amps) vs. the Trainpower 6200's 60 watts (3...

Tech 7 ampac 780 features two independent Tech 7 units in one housing. It is designed to control two trains in different blocks with common rail. This dual unit not only has a total output of 20VA, but features that include revolutionary slow speed...

Bristling with advanced control features, this unit delivers maximum railroading realism. For example, one of its key features is momentum control, sometimes referred to as flywheel action.INPUT:120 VAC 60 HzOUTPUT: 23 VDC, 18.5 VACTOTAL...

The Tech 6 Handheld plugs into the Tech 6 Sound Controller to give you the freedom to walk around your layout while operating your trains. It also permits the control of up to 6 decoder-equipped locomotives from this one handheld...

We all know DCC gives you many more features, especially getting the sounds and other features built into new decoder equipped locos. So you are interested in DCC but afraid to take the plunge? Worried DCC is too complex to understand? Do not want the...

ESU 50322 Speaker Monacor Sp6/4SQ, 59mm Round 8 Ohms, for PIKO G/LGB Loks 59mm Round 8 ohm 1-2 Watts for PIKO G/LGB Loks The speaker is specifically selected for use with the LokSound XL decoder. Additionally, the speaker is suitable...

The Kato Standard SX Power Pack is designed to keep your HO and N Scale standard DC trains running smoothly. Revised in 2018, this power pack is 100% compatible with all Unitrack electrical accessories and is an in-kind replacement for previous Kato...

 The LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All...

With its unique design the LokSound 5 Direct DCC can easily replaceboards that provide poor motor control, low volume, or generally inferiorsound. Not only will the decoder work fine with most factory installedspeakers, but it will sound even better with...

  LokSound 5 micro DCC "blank decoder", 8-pin NEM652, gauge: N, TT, H0   The LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit...

 The LokSound 5 micro DCC Direct has been specially developed for installation in Spur N vehicles of the Atlas and Intermountain brands: it can be inserted directly instead of the analog board installed there as standard. However, the decoder can...

 The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into...

 The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into...

Decoder tester (Replaces 51900), NEM651, NEM652, 21MTC, PluX22, Next18, single wires. With motor, LED-Monitor and 20mm speaker. New socket to accept decoder tester extension 53901Â Perhaps you are familiar with this scenario: there is a digital decoder...

LokProgrammer set: LokProgrammer unit, US 110V power supply, and serial to USB PC cable Dimensions: 95mm (3.74") x 85mm (3.35") x 22mm (0.87")   You want to listen to the sound spectrum of your favourite loco, or the special sound of that loco...