DCC Accessories

If required, SwitchPilot can be augmented with the SwitchPilot Extension Modul: Plugged in at the side of the SwitchPilot, it offers four relay-driven outputs, used for switching potential-free loads, or for polarizing the frog; the ideal supplement for...

The great variety of the ESU ECoS command station is so convincing to many model railroaders that they would like to replace their present digital station with an ECoS. This also has been inspiring the desire to continue to use the existing handheld...

The ESU Premium Foam Train Service Tray is the ideal tool for the maintenance and care of your locomotives. Two recesses are available for perfect work: The locomotive can be clamped upside down to comfortably reach the underbody of the locomotive. In...

 UR93 Features: Digitrax Duplex Radio Transceiver on LocoNet wire infrastructure (no IR support). More than double the radio range of UR92 Duplex units. Improved multi-path performance for cluttered layouts. Plug and Play setup, PS14...

  Materials for making 2 Signal Driver Cables for SE8C. Includes 30’of 10-wire Signal Driver ribbon cable & 8 10-Pin sockets.   Use this kit to make signal driver cables to connect your SE8c to the signals on the railroad. Make the cables...

 RD2 Remote Sensing Diodes for BDL16 series occupancy detectorsRemote sensing of 2 detection sections. Eliminates the need for long runs of heavy gauge wire between the BDL168, BDL16 & BDL162 and remotely located track sections. 

  Keeps locos running during power interruptions caused by dirty or bad track. Keeps light and other functions from dropping out due to power interruptions. Hold up time varies based on decoder load & track conditions. Use with Digitrax...

  Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. Use with Digitrax Series 6 Decoders with 6 pin sound harnesses such as SDN136PS &...

  Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. PX112-2 Plug ‘N Play Install on DH126 & DH166 Series Decoders PX Body Size 1...

  Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. Use with Digitrax Series 6 Decoders with 10 pin sound harnesses such as SDH166D &...

  For use with Digitrax Decoders Equipped with 6 pin Function Harness Keeps locos running during intermittent power interruptions resulting from dirty or bad track. 0.33 F Capacitance Use on 10-18V Track Power Hold up time varies...

  For use with Digitrax Decoders Equipped with 6 pin Function Harness 8 ohm 10x18 mm Oval speaker included. Keeps locos running during intermittent power interruptions resulting from dirty or bad track. 0.33 F Capacitance Use on...

  For use with Digitrax Decoders Equipped with 6 pin Function Harness 8 ohm 16 x 26 x 9 mm box speaker included Keeps locos running during intermittent power interruptions resulting from dirty or bad track. 0.33 F Capacitance ...

  For use with Digitrax Decoders Equipped with 2 pin PX socket or solder pad connections Keeps locos running during intermittent power interruptions resulting from dirty or bad track. 0.33 F Capacitance Use on 10-18V Track Power Hold...

 The PR4 makes decoder programming and interfacing your layout and computer easier than ever. The PR4 seamlessly switches between computer interface and decoder programming modes automatically without having to press any buttons. The PR4 is...

 It consists of a harness with 6 conductor Telco type wire with a male plug, a tester with a female 6 conductor jack, and a 100 Ohm 2 watt protection resistor. LT1 Features: Use as a diagnostic tester Test decoders prior to...

 The DT602D is our top-of-the-line, Duplex Radio Super Throttle.  The DT602D Advanced Super Throttle gives you direct control of two locos at a time with all the powerful features and flexibility serious model railroaders demand. The DT602D is...

 The DT602 Advanced super throttle gives you direct control of two locos at a time with all the powerful features and flexibility serious model railroaders demand.  Available in standard tethered or Radio Duplex.   The DT602 is...

  9G mini servo system for turnout or motion control. Under layout mounting bracket included. Compact install for tight N scale switches, and decks. Includes pre-formed drive wires. Supplied with mount hardware.

  Input interconnect board for DS74. Provides plug and play connectivity for DS74 inputs. Supplied with ribbon cable to plug into DS74 10 pin Input header. Allows plug-in of up to 4 DSXCP1 fascia controls. Direct ribbon cable plug-in...