- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
RR-CirKits, Inc CT-Coil - Coil, current sensing, 20 mH/1 ohm DCR - Multi Scale
$2.39Single CT (Current Transformer) coil. -
RR-CirKits, Inc CT-coil-set-4 - Coils, current sensing, set of 4 - Multi Scale
$7.49Set of 4 CT (Current Transformer) coils for BOD4 or BOD4-CP. -
RR-CirKits, Inc CT-coil-set-8 - Coils, current sensing, set of 8 - Multi Scale
$14.50Set of 8 CT (Current Transformer) coils for BOD-8. These 100:1 toroid coils sense the track current on leads passing through the hole in the middle of the coil. They connect to the BOD-8 with twisted pair cable such as CAT-3 or CAT-5 network cable. (up... -
RR-CirKits, Inc BOD-4 - 4 Block DCC Occupancy Detector, DCC Only, Rev D - Multi Scale
$20.55(Block Occupancy Detector-4) This board operates as a DCC occupancy detector for 4 blocks using remote CT coils. It outputs logic levels, and has a RR-CirKits standard ribbon connector interface. The "Power-Lok" feature optionally monitors the DCC bus... -
RR-CirKits, Inc BOD-8-SM - 8 Block DCC Occupancy Detector, DCC Only, Sample Mode compatible - Multi Scale
$38.54(Block Occupancy Detector-8 - SM) This new board is compatible with LCC node sample mode which allows using output drivers on the same I/O port. This board operates as a DCC occupancy detector for 8 blocks using remote CT coils. It outputs logic levels,... -
RR-CirKits, Inc UN8-BE - USB to Serial DB9 cable, 6 ft. - Multi Scale
$24.15USB to serial Interface unit. Includes driver disk. Well suited for interfacing NCE Power Pro command station to USB.This unit does not require any modifications to the command station for proper attachment. Note: Not for Power Cab, nor for Smart Booster... -
RR-CirKits, Inc Signal-LCC-P - Signal LCC Board with IDC Pin connections - Multi Scale
$59.9016 Led drivers plus 8 line Input/Output node for NMRA CAN bus LCC®. Logic level I/O port compatible with other standard RR-CirKits I/O modules. Boot Loader for user installable firmware upgrades. Includes powerful internal Logic Elements. Compatible with... -
RR-CirKits, Inc Signal-LCC-S - Signal LCC Board with screw terminal connections - Multi Scale
$59.9016 Led drivers plus 8 line Input/Output node for NMRA CAN bus LCC®. Logic level I/O port compatible with other standard RR-CirKits I/O modules. Boot Loader for user installable firmware upgrades. Includes powerful internal Logic Elements. Compatible with... -
RR-CirKits, Inc LCC-Starter-Kit - Includes LCC-Buffer-USB, LCC-Power-Point, LCC Terminator-pair, LCC cable 1 ft - Multi Scale
$80.96LCC Starter Kit Includes an LCC Buffer-USB, a Power-Point, 2 Terminators, includes 1' LCC cable and USB cable. -
RR-CirKits, Inc LCC-BUFFER-USB - LCC Buffer-USB, NMRA CAN bus LCC to USB Interface - Multi Scale
$56.66LCC Buffer-USB Features: • NMRA CAN bus LCC® to USB interface. • 2,500 Volt High Speed Digital isolation between CAN bus LCC® and USB port. • Simplify your LCC configuration and/or use a PC based CTC... -
Digitrax DS78V - Eight Servo LocoNet Stationary & Accessory decoder for turnout control
$69.36Eight 9G servo decoder for 2-position Slow-motion turnouts. Configurable to control eight 3-position semaphores. Works with compatible LocoNet Systems. Plug and play connections. Option setup switches for configuration. On-layout... -
Atlas 200 - Snap-Relay - Multi Scale
$16.73A double-pole, double-throw relay with actuating mechanism driven by a momentary-power, twin coil solenoid. (A solenoid is a cylindrical coil of insulated wire in which an iron core is made to move back and forth by a flow of electric current.) With just... -
Wutter Vehicle and Details Next18AB - WVD ESU LokSound 5 Micro NEM662 Next18 Adapter Board for Kato F2, F3, F7, FP7, F40PH, P42 - N Scale
$19.80Dimensions: Â 48.4mm x 13.7mm x 2.0mm To Top Of Next18 Connector (Overall height will vary depending on decoder) Notes: 1. This is the same format as Digitrax DN163K0x and TCS K0D8-X series decoders. 2. This product IS NOT recommended for use with E5,... -
Train Control Systems (TCS) 2000 - Keep Alive KA3
$27.03With Black w/ White Stripe wire and Blue wire for power. The Keep Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA3 will power an HO-Scale locomotive with... -
Train Control Systems (TCS) 1699 - Wow Speaker 16mm x 9mm Micro
$15.26This 16mm x 9mm speaker could be classified as a "sugar cube" speaker. This style of speaker is often feature in cell phones and tablets and performs slightly differently from standard speakers. This style of speaker REQUIRES mounting with a baffle to... -
Train Control Systems (TCS) 1698 - Wow Speaker 13.6mm x 9.6mm Micro
$15.26This 13.6mm x 9.6mm speaker could be classified as a "sugar cube" speaker. This style of speaker is often feature in cell phones and tablets and performs slightly differently from standard speakers. This style of speaker REQUIRES mounting with a baffle... -
Train Control Systems (TCS) 1694 - Wow Speaker 28mm High Bass Round 4W
$14.40You haven’t heard WOWSound until you’ve heard it through our 28mm High Bass 4W WOWSpeaker! This speaker handles an unprecedented 4 watts of power, and showcases a mighty bass reflex that packs a big sonic punch. Welcome to the new standard for sound... -
Train Control Systems (TCS) 1668 - Keep Alive KA4
$27.03With Black w/ White Stripe wire and Blue wire for power. The Keep Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA4 will power an HO-Scale locomotive with... -
Train Control Systems (TCS) 1456 - Keep Alive KA2
$27.03TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. Newly-redesigned at half the size of a KA4, the KA2 will power HO or N scale locomotives with approximately... -
Train Control Systems (TCS) 1454 - KA 1 (Keep Alive) - Multi Scale
$27.03TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. Newly-redesigned and coming in at half the size of a KA3, the KA1 will power HO or N scale locomotives...