DCC Accessories

All new easy programming with no jumpers. Features: On board display Control for 8 Tortoise switch machines Remembers the position of switch during power outages Supports the full range of DCC accessory addresses (1-2044) Easy address...

Your Kato Unitrack and LGB remote control turnouts can now be DCC controlled. The Switch-Kat provides connections for optional switch position indicator lights and "local control" pushbuttons. Simple installation, two wires to the track, two wires to the...

Engineer cab with LED display uses a more conventional potentiometer knob for speed control. Definite stop and starting points. Note** the speed setting of the knob is instantly applied to any locomotive selected. Clear, easy-to-read display, select up...

Engineer cab with LED display uses a more conventional potentiometer knob for speed control. Definite stop and starting points.  Clear, easy-to-read display, select up to 6 loco recalls, F0-F28, select accessory, select macro. Note: the speed...

The Cab06 uses a more conventional knob for speed control. The Cab06 can be set to YARD mode. Yard mode makes the speed knob act as a "center off" speed control. Turn the knob to the right and the loco will increase speed in the forward direction. Turn...

Add an SB5 to your Power Cab when you need more track power. The SB5 can supply 5 Amps of track power while freeing up your Power Cab for true walk around control. The SB5 accommodates up to 6 throttles plus an additional 3 cab bus accessories such as...

Our deluxe Radio Equipped Pro Cab R provides the most user-friendly access to all system features. Uncomplicated menus on the easy to read, backlit LCD display guide you through the most advanced operations with a minimum of fuss. Instant control of up...

Decoder tester (Replaces 51900), NEM651, NEM652, 21MTC, PluX22, Next18, single wires. With motor, LED-Monitor and 20mm speaker. New socket to accept decoder tester extension 53901Â Perhaps you are familiar with this scenario: there is a digital decoder...

LokProgrammer set: LokProgrammer unit, US 110V power supply, and serial to USB PC cable Dimensions: 95mm (3.74") x 85mm (3.35") x 22mm (0.87")   You want to listen to the sound spectrum of your favourite loco, or the special sound of that loco...

Thin cables Who doesn’t know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from our customers, as of now we...

The great variety of the ESU ECoS command station is so convincing to many model railroaders that they would like to replace their present digital station with an ECoS. This also has been inspiring the desire to continue to use the existing handheld...

  Works with compatible LocoNet Systems Compact size for easy one-handed operation Color 1.5” LCD Display Screen Full numeric keys for easy locomotive selection Fine speed control with encoder knob Forward/Reverse toggle switch with...

  Works with compatible LocoNet Systems Compact size for easy one-handed operation Color 1.5” LCD Display Screen Full numeric keys for easy locomotive selection Fine speed control with encoder knob Forward/Reverse toggle switch with...

 UR93 Features: Digitrax Duplex Radio Transceiver on LocoNet wire infrastructure (no IR support). More than double the radio range of UR92 Duplex units. Improved multi-path performance for cluttered layouts. Plug and Play setup, PS14...

  Materials for making 2 Signal Driver Cables for SE8C. Includes 30’of 10-wire Signal Driver ribbon cable & 8 10-Pin sockets.   Use this kit to make signal driver cables to connect your SE8c to the signals on the railroad. Make the cables...

  Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. Use with Digitrax Series 6 Decoders with 6 pin sound harnesses such as SDN136PS &...

  Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. Use with Digitrax Series 6 Decoders with 10 pin sound harnesses such as SDH166D &...

 PS615 90W AC/DC 15VDC 6 amp power supply for use with all Digitrax Command Stations and Boosters operating at 5 amps. High-efficiency power supply 15 VDC output Accepts different cord sets Meets MEPS VI and DOE VI efficiency standards CE...