DCC Decoders

The IMD4 is a N-scale drop-in decoder which is designed for InterMountain locomotives. Examples include the following: InterMountain: SD40T-2 SD45T-2 SD45-2 See the installation pages for a full list of compatible engines! Back EMF Load...

The K3D3 is a N-scale drop-in decoder designed specifically to fit the Kato N-Scale NW2 locomotive. Note: This decoder is very fragile due to its thickness and physical design. Special caution should be taken when installing to ensure the PCB is...

The CN is a N-scale drop-in decoder for older Atlas, Kato, and Intermountain locomotives. Examples include the following: Atlas: GP7/GP9 Old Style GP30/GP35 Old Style SD35/SD50/SD60/SD60M B30-7/B40-8 GP38 GP40 DCC-Ready SD9...

The MP-15N is a N-scale drop-in decoder which is designed for the Atlas MP-15 locomotive. See the installation pages for a full list of compatible engines! Back EMF Load Compensation: Provides superior slow speed control and high performance...

The MC4 is a 4-function HO and N scale hard-wire decoder with a 7 pin JST socket. The MC4 is designed for use in locomotives where a T-series or M-Series decoder is too large, and more than 2 lighting functions are needed. The MC4 is great for use in...

The M4 is a small form factor hard-wire decoder with 4 lighting functions for HO and N scale installations. This decoder is designed for installations where space is limited. This decoder is also available with 8-pin NMRA plugs or Keep...

This function-only decoder is designed for any scale where extra lighting features and functions are needed. This decoder includes a 6-pin harness for easy installation and wiring. These decoders are commonly used for smoke coils. Note:...

The A6X is six function HO-scale "drop-in" style mobile decoder with integrated 1.5V power supply for Atlas, Athearn, Kato, etc. locomotives. Examples include the following: Athearn: F59PHI F3 Atlas: RS-1/RS-3/RS-11 C424 GP7 Kato: GP35 Back...

The T6X is a multi-purpose HO-scale decoder. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. The T6X may be used in locomotives which have ditch lights in addition to forward and reverse headlights, as well...

The T4X is a multi-purpose HO-scale decoder. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. The T4X may be used in locomotives which have ditch lights in addition to forward and reverse headlights. Note: As...

The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all characteristics, however, the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility comes with a cheaper price. LokPilot...

With its unique design LokSound 5 DCC Direct, with integrated PowerPack can easily replace boards that provide poor motor control, low volume, or generally inferior sound. Not only will the decoder work fine with most factory installed speakers, but it...

The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into almost any...

For all HO Scale engines with 9 pin quick plug D13J decoder 10 pack - new smaller replacement for D13SRJ Direct plug equipped with NMRA 9 pin DCC “Quick Plug” and a 9 pin 8" harness is also included. Dimensions: 1.03 x 0.630 x .185 inches...

The LokSound 5 micro DCC Direct Kato Japan has been specially developed for installation in Kato-branded track N vehicles: in many European and Japanese locomotives of this manufacturer, the ser decoder can be installed directly below the engine instead...

Series 6 Features 2 FX3 Functions .418” x .621” x .107”10.63mm x 15.79mm x 2.72mm Fits MicroTrains Line SW1500 units

Features: Board replacement decoder for Atlas MP15 units Golden-White LEDs for added realism Decoder Lock equipped   Don’t settle for a decoder without the latest features in your locomotive! Upgrade your N Scale Atlas...

The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all characteristics, however, the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility comes with a cheaper price. LokPilot...

With the LokSound 5 Nano DCC, ESU has succeeded in developing an even smaller LokSound decoder: With only 19.6 mm x 8.5 mm x 3.2 mm, it is the smallest LokSound decoder we have ever built. Thus, it should really be used in all vehicles of nominal sizes N...

 The LokSound 5 micro DCC Direct Kato USA has been specially developed for installation in track N vehicles of the Kato USA brand: Most diesel locomotives of this manufacturer are installed in the American model of these decoders instead of the...