HO Scale Track Accessories

A Fine-Grit Abrasive Block for Track & Electrical Contacts If you're looking for a mildly abrasive cleaning block for track and electrical contacts that minimizes scarring of your metal surfaces, this is it. This soft abrasive Bright Boy cleaner is...

3 SPST On/Off Switches in Parellel The Atlas Connector is a panel with three on-off switches for track sections (blocks) or accessories. It has three SPST (single-pole, single-pole) on-off switches in parallel. Use to control power to sidings,...

  For use with all solenoid motors (e.g. PL-10 and Pl-11). Connect this unit to the 16v ac supply on your transformer. The capacitor stores up power and discharges a 'kick' to ensure turnout blades 'snap over' every time. PL-10 Turnout Motors ...

 This fits directly to the PL-10 family of Turnout Motors. The 2 single pole changeover switches can be used to control polarity, route selection diagrams, or 2 aspect colour light signalling etc. Rated 16v 2amps (continuous) or 2.5amps (momentary)...

Provides the short burst of current required to operate the PL-11 and PL-10 series of Turnout Motors. The PL-31 Connectors are ideal for attaching the PL-34 Wiring Looms or PL-38 wire to these switches without soldering; the included Shrouds prevent...

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts with this five-pack of Switch Machines! The Layout Control System is expandable at any time to grow with your layout, and can be...

Keep Trains Running Reliably with Bright Boy Improve the conductivity of your tracks by keeping them clean with easy-to-use Walthers Bright Boy. This rubber-based abrasive is also great for taking grime off metal loco, freight or passenger car wheels too.

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is...

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is...

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a DCC accessory decoder is...

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale switch machines! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power - and switch...

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power - and switch machines...

Provides the short burst of current required to operate the PL-11 and PL-10 series of Turnout Motors. The PL-31 Connectors are ideal for attaching the PL-34 Wiring Looms or PL-38 wire to these switches without soldering; the included Shrouds prevent...

Attaches directly to the PL-10 family of Turnout Motors with contact adhesive. This single pole switch can control frog polarity, ground signals etc. PL-31 Spade Connectors can be used to attach wires to these units without the need for soldering. ...

Description Switch Machine extended drive pin. Designed for use with PL-9 mounting plate. Use this if you do not wish to cut a large hole in your baseboard. Drill a hole, 9.5mm (3/8") through the baseboard beneath the center of the tie bar.

Switch Machine for use with Peco Streamline and Peco Setrack. The most reliable, discrete and simple method is to clip one of these directly to the underside of a Peco turnout.

New Rail Models Multi Scale Blue Point Turnout Controller Mount Screws 25 Pack

New Rail Models Multi Scale Blue Point Turnout Controller Hold Down & Clamps 20 Pack

New Rail Models Multi Scale Blue Point Turnout Controller Clamp & Screw 6 Pack

New Rail Models Multi Scale Blue Point Turnout Controller Mini Flex Link Kit