- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Jackson Railcar H82008 - Switch Heater - HO Scale
$4.42Switch heaters are used in regions where snow and ice can cause switches to freeze up, disabling the ability to change the route of train traffic. Switch heaters were created to help stop the buildup of ice and allow switches to remain working in winter... -
Jackson Railcar H82007 - Switch Stand (2 pck) - HO Scale
$4.64Add a bit of detail to your Atlas turnouts with these switch stands. Features two sets of stands, in both through and diverging route positions.l -
NMRA HOn3 Standards Gauge
$21.05Designed and developed by the NMRA (National Model Railroad Association) Engineering committee, this pocket sized gauge enables you to check all important dimensions on your track and rolling stock as follows: Gauge of track and turnouts Flangeway depth... -
Walthers SceneMaster 949-522 - Cratex Abrasive Block Extra Fine - Multi Scale
$11.00A Fine-Grit Abrasive Block for Track & Electrical Contacts If you're looking for a mildly abrasive cleaning block for track and electrical contacts that minimizes scarring of your metal surfaces, this is it. This soft abrasive Bright Boy cleaner is... -
Walthers Cornerstone 933-2321 - Cornerstone Turntable Advanced Control Module - For DCC Operation - HO Scale
MSRP: $99.98$81.59For DCC Operation The Walthers Cornerstone Turntable Advanced Control Module makes it possible to operate your Motorized Turntable using DCC, serial UART, keypad or switch contacts. For DCC applications this circuit will function as a stationary decoder... -
Walthers Cornerstone 933-2858 - Turntable Power Supply for Cornerstone Turntables - 800mA, 16V DC Output - Multi Scale
MSRP: $21.98$19.39800mA, 16V DC Output Power your Walthers Cornerstone HO or N Scale Turntables (sold separately) quickly and easily with this plug-in wall unit featuring: Installs in minutes - instructions included Independent 800 ma 16VDC filtered power supply Includes... -
Atlas 205 - Connector - Multi Scale
$12.953 SPST On/Off Switches in Parellel The Atlas Connector is a panel with three on-off switches for track sections (blocks) or accessories. It has three SPST (single-pole, single-pole) on-off switches in parallel. Use to control power to sidings,... -
New Rail Models 40022 - Flex Link(TM) -- Starter Kit - Includes all parts to operate one Blue Point - Multi Scale
$16.94Simplify installation of Blue Point(TM) switch machines (sold separately) with this complete and easy to use system. A wood knob mounted on the fascia is connected to a nylon push-pull tube, which then connects to the switch machine. Tubes are 3' (91... -
New Rail Models 40024-5 - Flex Link(TM) Tubing pkg(5) -- Length: 3' 91.4cm - Multi Scale
$11.44Simplify installation of Blue Point(TM) switch machines (sold separately) with this complete and easy to use system. A wood knob mounted on the fascia is connected to a nylon push-pull tube, which then connects to the switch machine. Tubes are 3' (91... -
-
New Rail Models 40023-5 - Flex Link Hardware Kit - Includes all harware to attach to 5 Blue Points - Multi Scale
$68.33Simplify installation of Blue Point(TM) switch machines (sold separately) with this complete and easy to use system. A wood knob mounted on the fascia is connected to a nylon push-pull tube, which then connects to the switch machine. Tubes are 3' (91... -
MACRail 203 - Operating Flip Derail "The Scotty" 2 Pack - HO Scale
$7.751:87 HO Scale - Operating Derail "Flip Type - The Scotty" (2 Pack) Kit includes: (2) Assembled "Flip" type derails (1) Custom decal set for adding different styles of right of way derail signs ** QR link to instructions... -
Digitrax DSXCP1 - Fascia mount Switch control device for the DS74 - Multi Scale
$13.59Fascia mount Switch control device. Wire to DS74 input cable, or use DSXC4 for plug and play. Two color leds display current Switch state. Supplied with 3 wire control cable. -
PECO PL-35 - Capacitor Discharge Unit - Multi Scale
$35.91For use with all solenoid motors (e.g. PL-10 and Pl-11). Connect this unit to the 16v ac supply on your transformer. The capacitor stores up power and discharges a 'kick' to ensure turnout blades 'snap over' every time. PL-10 Turnout Motors ... -
PECO PL-55 - Turntable Motor - Multi Scale
$100.54Non-indexing turnatable motor (which means that there are no pre-set or programmable settings) means that the modeller can simply line up the deck against the exit or entrance road by eye, and the controls allow for small adjustments should things not... -
PECO PL-15 - Turnout Motor Mounting Twin Microswitch for PL-10 - Multi Scale
$18.76This fits directly to the PL-10 family of Turnout Motors. The 2 single pole changeover switches can be used to control polarity, route selection diagrams, or 2 aspect colour light signalling etc. Rated 16v 2amps (continuous) or 2.5amps (momentary)... -
Bachmann 44471 - 14-Piece Graduated Pier Set - HO Scale
$26.07Create an over/under figure “8” layout or similar configurations. Compatible with steel alloy and nickel silver E-Z Track® (3 1/8" vertical clearance under the tallest pier) -
Ribbonrail 310 - 10" Track Gauge - HOn3 - Straight
$8.75Product Information Ribbonrail HO Scale Track Alignment Gauges are make it easy to layout smooth, consistent curves or absolutely straight lines when using flex track. Simply slide between rails to correctly position rails. Helps in laying, spiking and... -
Ribbonrail 305 - 5" Track Gauge - HOn3 - Straight
$8.75Product Information Ribbonrail HO Scale Track Alignment Gauges are make it easy to layout smooth, consistent curves or absolutely straight lines when using flex track. Simply slide between rails to correctly position rails. Helps in laying, spiking and... -
Ribbonrail 42 - 5" Track Alignment Gauge - Curved -- 42" Radius - HO Scale
$4.25Product Information Ribbonrail HO Scale Track Alignment Gauges are make it easy to layout smooth, consistent curves or absolutely straight lines when using flex track. Simply slide between rails to correctly position rails. Helps in laying, spiking and...