HO Scale Track Accessories

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power - and switch machines...

Animate your models in minutes with the Walthers Cornerstone Motorizing Kit. This fully assembled drive unit is a drop-in mount for Walthers Double Track Swing Bridge (933-3088), 90' Turntable Kit (933-3171) and the Walking Beam Oil Pumps in HO...

Product Information Add more operating fun to WalthersTrainline and other HO sets (sold separately) in minutes with easy to use Power-Loc(TM) track, now with nickel silver rail for better performance plus brown ties and gray roadbed for added realism!...

Rix Products 628-0002 - Rail-It Portable Rerailer - HO Scale The Rix Rail-it is a unique way to place cars and engines on the track. Just set the Rail-it down one a straight piece of track. Set the car on the Rail-it and roll down the ramp. The Rix...

For magnetically actuated couplers.  The fast and easy way to uncouple equipment fitted with magnet-activated knuckle couplers anywhere on your layout. Simply place between cars and magnets open knuckles immediately. Tool is Designed to work with the...

Makes re-railing steam locos and bogie vehicles simple. Length of unit, 313mm (12 5/16in).

The Code 70 system can be connected directly to the Code 83 system by using the new SL-115 Transition track, that ensures a smooth transition from one rail type to the other without any noticeable change. PECO Transition Track Code 83 to Code 70 4pcs

PECO SL-113 For use between sections of Code 100 and Code 75 track, so for example could be used to incorporate a Code 75 Asymmetric 3- way Turnout (SL-E199) into a Code 100 layout, or to connect a Code 100 Streamline or Setrack 'fiddle yard' to a Code...

Provides the short burst of current required to operate the PL-11 and PL-10 series of Turnout Motors. The PL-31 Connectors are ideal for attaching the PL-34 Wiring Looms or PL-38 wire to these switches without soldering; the included Shrouds prevent...

Attaches directly to the PL-10 family of Turnout Motors with contact adhesive. This single pole switch can control frog polarity, ground signals etc. PL-31 Spade Connectors can be used to attach wires to these units without the need for soldering. ...

Description Switch Machine extended drive pin. Designed for use with PL-9 mounting plate. Use this if you do not wish to cut a large hole in your baseboard. Drill a hole, 9.5mm (3/8") through the baseboard beneath the center of the tie bar.

Switch Machine for use with Peco Streamline and Peco Setrack. The most reliable, discrete and simple method is to clip one of these directly to the underside of a Peco turnout.

With Tracksetta you can make sure your straights are really straight and your curves are smooth without any kinks or sudden changes of direction which make derailments inevitable. These simple but effective tools are a worthwhile investment since well...

With Tracksetta you can make sure your straights are really straight and your curves are smooth without any kinks or sudden changes of direction which make derailments inevitable. These simple but effective tools are a worthwhile investment since well...

With Tracksetta you can make sure your straights are really straight and your curves are smooth without any kinks or sudden changes of direction which make derailments inevitable. These simple but effective tools are a worthwhile investment since well...

With Tracksetta you can make sure your straights are really straight and your curves are smooth without any kinks or sudden changes of direction which make derailments inevitable. These simple but effective tools are a worthwhile investment since well...

With Tracksetta you can make sure your straights are really straight and your curves are smooth without any kinks or sudden changes of direction which make derailments inevitable. These simple but effective tools are a worthwhile investment since well...

With Tracksetta you can make sure your straights are really straight and your curves are smooth without any kinks or sudden changes of direction which make derailments inevitable. These simple but effective tools are a worthwhile investment since well...

Highly detailed, injection molded kit. Perfect for use in loco servicing scenes, roundhouses, engine houses and more. Includes pit, Code 100 rail and details. Contains enough parts to build one inspection pit 11.7" (297mm) long or two smaller units...

New Rail Models Multi Scale Blue Point Turnout Controller Mount Screws 25 Pack