N Scale

Stair case with hand rails 3 per kit includes a assembly jig. Designed so they can go in any direction from building.

Delivery wagons based on drawing and Photos of wagons used from the 1850’s till the early 1900’s. Kit contains parts for Two wagons cut from laser board and micro plywood.

Note the frame on back side. All laser cut, all you need to do is glue the frame on and set on your layout. This fence has 144 scale ft and no gate.

Stair kit has 12 stringers, 80 treads and an assembly jig.

Kit contains 3 Farm Wagons.

The kit has parts to make one flat car or gondola. The price is less trucks and couplers. It takes Micro trains trucks with short extension couplers.

Patterned after many of the home made cars found on logging line and branch line around the country. They had a small shack built on a flat car for storage and were even used as freight cars for small loads. Kit is light ply and laserboard construction...

All wood kit priced less trucks and couplers. Takes Micro trains trucks with short extension couplers.

The kit has parts to make one flat car or gondola. The price is less trucks and couplers. It takes Micro trains trucks with short extension couplers.

Kit contains 6 - 80 Foot Span Trusses with a 4/12 Slope.

Kit contains 10 - 50 Foot Span Trusses with a 4/12 Slope.

N Scale T-trak bridge drop module the measures 12 1/8 by 14 inches with a 2 in drop in the center. The bridge module is set up for using the Kato 20-40 or 20-45 sections on the ends and either the Kato 20-010 186mm track section or the bridge in the...

Simple to build and lightwieght, these are the ideal module to get started in T-Track or model railroading in general. Made from 1/8th" plywood with tab and slot construction, the only tool needed to build is a small hammer. These are the 12 1/8" x 12...

Simple to build and lightwieght, these are the ideal module to get started in T-Track or model railroading in general. Made from 1/8th" plywood with tab and slot construction, the only tool needed to build is a small hammer. These are the 12 1/8" x 12...

A small branch-line engine house or car shed. Will fit a GP-38 or 50 ft cars. Or use a as a heavy equipment repair building. Our weathered printed paper siding is supplied as shown. Foot print f 3 x 5 inches

A nice side factory or warehouse for your layout. Foot print is 11 1/4 x 3 inches and includes Tichy windows and doors plus pre-colored roofing

This is a 100 ft long cover bridge and is like many bridge used around the country. The kit includes stone easer cut abutments which allow for 1 7/8 inch clearance under the bridge. Designed to be a simple build and no cutting involved other then...

This is a laser cut unpainted wood kit that needs assembly. Includes material for one house and two sheds. Fencing NOT INCLUDED. The photos of the Three are of the N scale build the other is the HO version. These are based on a photo of housing for...

This kit is bases on the silo in Monett Missouri. The silo was all that is left of a old brewery that was by the rail yard just south of town. In 2020 the town paid to have Raine the Americas Muralist (www.americasmuralist.com ) come up with w design...