N Scale

Description The Suspended Flashing Traffic Lights are perfect for rural areas where a flashing yellow warning signal is needed to caution traffic. They are ready to place right out of the package. They're hand-painted and authentically weathered. The...

Built in March of 1958, this PS-2 hopper with Bettendorf trucks was purchased by Western Pacific in an order of 30 cars. The Pullman-Standard all-welded steel, 2,003 cubic-foot two bay covered hopper would become one of the most popular cars of its type...

A small rural barn that can be found most anywhere. Kit includes the lean-to, foundation, signs for the poultry end, and a stencil for the Mail Pouch sign. All other material to built it but Glue a paint. Foot print with Lean-to 3 x 4 inches

Kit contains 25 - 3'0" x 6'8" Doors and Trim.

Kit contains 9 - 12x14 Service Doors Glass Panel.

Paper laser cut Corrugated metal sheets, Brown in color. Each kit has 2 sheets that have 80 sections of metal. These sections are a scale 40 inches by 13 feet and each sheet covers 17square inches of area for a total of 34 plus.

The perfect solution for all those building with no foundations. Each pack contains 6 eight inch long by 5/32 inch square sticks engraved on one side with a stone pattern. Each stick is a scale 25 inches tall.

Sheets are true scale size 2x8 wood form section in a running bond. Can be used for foundations, retaining walls and portals, any were concrete has been formed when poured. Sheets cut from laser board and come in a neutral ivory color and are 1/64th inch...

Each kit contains 12 laser engraved shelves that are a scale 8 foot high by 10 foot long and 10 inches deep. These come unpainted and need to be finished. Note: For the photos, the shelves were sprayed white.

This kit has the parts for 9 lumber stacks. Each stack is 4 scale feet wide and 30 inches tall. Each stack is made from 6 layers of 1/32 Basswood colored Taskboard and have staggered ends , with the top and bottom layer being engraved for boards. A good...

Kit contains 7 - 18 foot ladders.

Stair case with hand rails 3 per kit includes a assembly jig. Designed so they can go in any direction from building.

The kit has parts to make one flat car or gondola. The price is less trucks and couplers. It takes Micro trains trucks with short extension couplers.

N Scale T-trak bridge drop module the measures 12 1/8 by 14 inches with a 2 in drop in the center. The bridge module is set up for using the Kato 20-40 or 20-45 sections on the ends and either the Kato 20-010 186mm track section or the bridge in the...

Simple to build and lightwieght, these are the ideal module to get started in T-Track or model railroading in general. Made from 1/8th" plywood with tab and slot construction, the only tool needed to build is a small hammer. These are the 12 1/8" x 12...

A small branch-line engine house or car shed. Will fit a GP-38 or 50 ft cars. Or use a as a heavy equipment repair building. Our weathered printed paper siding is supplied as shown. Foot print f 3 x 5 inches

This kit is bases on the silo in Monett Missouri. The silo was all that is left of a old brewery that was by the rail yard just south of town. In 2020 the town paid to have Raine the Americas Muralist (www.americasmuralist.com ) come up with w design...

This kit is inspired by the photo on the top which I found on-line. The building was in Salt Lake City date unknown but I'd guess between the 1880-1920's. Building is unique in one way as the roof goes through the wall on the right side and the two roof...

This kit is based a store in Belville, NC. Stores such as these used to be in every town and hamlet and may are still in use in small town across the county . So this structure will fit in most any era being modeled.