Woodland Scenics SubTerrain Systems

These solid sheets of foam material can be used to enclose tunnels and build flat areas on your layout for towns or buildings. The 1/4" (WOO1422) and 1/2" (WOO1423) sheets can be bent to tight radius curves. Each piece measures 12" 20cm Wide x 24" 60cm...

These solid sheets of foam material can be used to enclose tunnels and build flat areas on your layout for towns or buildings. The 1/4" (WOO1422) and 1/2" (WOO1423) sheets can be bent to tight radius curves. Each piece measures 12" 20cm Wide x 24" 60cm...

This light-weight, non-shrinking filler putty dries with similar characteristics to foam. It's ready to use right from the jar and dries to a bright white color. Perfect for filling cracks between foam sections or small gaps and holes along the layout...

Low Temp Glue Sticks melt at a temperature that will not damage foam. Use with Glue Gun #785-1445, sold separately.    AN IMPORTANT NOTE: This tool and its accessories are designed for use with Woodland Scenics own high-density, nontoxic expanded...

Perfect for securing Risers and Inclines from the Subterrain System, this adhesive works well on most materials, such as foam, cork, Homasote and wood. It's specially formulated to dry completely when applied between foam sections, unlike most common...

Special Nichrome wire retains an even heat temperature required to cut and shape Woodland Scenics foam products. Package includes 4' 1.2m of wire. Use only with Woodland Scenics Hot Wire Foam Cutter (#785-1435), sold separately.    AN IMPORTANT NOTE:...

Designed especially for cutting thicker pieces of foam, this versatile knife comes with a replaceable 3" (2-1/4" long cutting surface) blade. Ideal for cutting and carving foam sections as you shape your scenery. (Replacement blades are available...

These special nails are designed to hold foam sections, roadbed and other features in place temporarily. Easy to remove, they allow you to refine your track plans and scenery without damage to the surface. Each nail measures 2" long and a package comes...

These solid sheets of foam material can be used to enclose tunnels and build flat areas on your layout for towns or buildings. The 1/4" (785-1422) and 1/2" (785-1423) sheets can be bent to tight radius curves. Each piece measures 12" 20cm Wide x 24" 60cm...

Use these special foam boards around the edge of your layout to define scenery contours. Easily cut with Hot Wire Foam Cutter (#785-1435) or Foam Knife (#785-1433), both sold separately, to follow the profile of hills and other features. Special...

Flexible inclines are designed to simplify adding changes in elevation along straight or curved tracks. The pre-cut foam sections are molded in 2, 3 or 4 percent grades, which takes the guesswork and complex math out of building different levels of track...

Incline starters can be used alone or combined with Incline Sets (785-1410, 1411 & 1416, each sold separately) to start your track on an incline or continue down grade.    Two Percent (#785-1412) Starters raise the track elevation 1/2"; Four Percent...

Take your layout to a new level with the SubTerrain Layout System, which uses rigid, high-density foam products to add grades and upper levels for track or highways on any layout. No power tools are required for assembly or installation. The light-weight...

Incline starters can be used alone or combined with Incline Sets (785-1410, 1411 & 1416, each sold separately) to start your track on an incline or continue down grade. Two Percent (#785-1412) Starters raise the track elevation 1/2"; Four Percent...

Incline starters can be used alone or combined with Incline Sets (785-1410, 1411 & 1416, each sold separately) to start your track on an incline or continue down grade.    Two Percent (#785-1412) Starters raise the track elevation 1/2"; Four Percent...

Flexible inclines are designed to simplify adding changes in elevation along straight or curved tracks. The pre-cut foam sections are molded in 2, 3 or 4 percent grades, which takes the guesswork and complex math out of building different levels of track...

Flexible inclines are designed to simplify adding changes in elevation along straight or curved tracks. The pre-cut foam sections are molded in 2, 3 or 4 percent grades, which takes the guesswork and complex math out of building different levels of track...

Take your layout to a new level with the SubTerrain Layout System, which uses rigid, high-density foam products to add grades and upper levels for track or highways on any layout. No power tools are required for assembly or installation. The light-weight...

Take your layout to a new level with the SubTerrain Layout System, which uses rigid, high-density foam products to add grades and upper levels for track or highways on any layout. No power tools are required for assembly or installation. The light-weight...