- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Train Control Systems (TCS) 1516 - WOW101-Steam - HO Scale
$107.67The WOW101 is a universal decoder for locomotives with DCC-ready 9-pin plugs, or locomotives which cannot accommodate a motherboard or WOWKit. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. The WOW101 is... -
Train Control Systems (TCS) 1706 - UNIV-SH2-C Speaker Housing Kit - HO Scale
$17.72Universal speaker housing for the TCS 28mm round speaker (included). This simple, closed design channels both the front and rear audio out the front of the speaker housing. This housing should only be used in models with a closed upper shell, such as... -
Accu Lites 10006 - SNAPS! II Wiring Connector for Tortoise Switch Machine -- 2020 Update with Wider Connection, 12 Volt (6 PACK) - Multi Scale
$35.65Note: designed for use with Tortoise(TM) switch machines manufactured after May/June 2020. See ACL1001 for old version SNAPS! is a new product that we have developed and manufactured in-house here at ACCU-LITES, Inc. SNAPS! is a EZ wiring connector for... -
Digitrax SDXH187MT - Series 7 Sound Decoder - 8 Selectable Sound Schemes Included - HO Scale
$53.048 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives 21MTC interface/21 PIN Motor 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer -
Digitrax SDN147PS - Series 7 Sound Decoder - 2 Selectable Sound Schemes Included - N Scale
$48.142 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax Easy Connect 8 Pin Harness Motor 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB... -
ESU 51831 - SwitchPilot 3 Plus: 8x Accessory Decoder - Multi Scale
$71.39SwitchPilot 3 Plus decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption. In order to facilitate the rather... -
2 foot RJ12-6P6C (DCC cable)
$4.95RJ12 cable with a length of 2 feet. For use with DCC systems such as Digitrax LocoNet. -
NixTrainz 8 - Decoder Buddy Mini (2.2K) - HO Scale
$12.75The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications. There has also been interest in HOn3 and S-Gauge applications. -
Digitrax SDXH167D - Series 7 Sound Decoder Sound FXv3 (8 CV Selectable) - HO Scale
$48.148 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax 9-Pin Harness Motor 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer 10-Pin... -
Digitrax SDH167D - Series 7 Sound Decoder Sound FXv3 (2 CV Selectable) - HO Scale
$39.982 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax 9-Pin Harness Motor 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB programmer 10-Pin... -
Kato 22-102 - Analog Sound Box - Multi Scale
$306.18In-Cab Sound from the comfort of your home The Analog Sound Box has been developed as a joint effort between engineers at Kato and Soundtraxx to craft a simple, versatile, and powerful sound system for use on non-DCC layouts. Completely... -
Accu Lites 10001 - SNAPS! II Wiring Connector for Tortoise Switch Machine -- 2020 Update with Wider Connection, 12 Volt - Multi Scale
$6.81Note: designed for use with Tortoise(TM) switch machines manufactured after May/June 2020. See ACL1001 for old version SNAPS! is a new product that we have developed and manufactured in-house here at ACCU-LITES, Inc. SNAPS! is a EZ wiring connector... -
Bachmann 44933 - E-Z Command Plus Digital Command Control Station - HO Scale
$183.80Bachmann Trains is pleased to announce the next generation of the E-Z Command® DCC Control System: E-Z Command® Plus. With E-Z Command®, digital control of speed, lighting, sound, and direction of multiple... -
NixTrainz 7 - Decoder Buddy Light Test Board - HO Scale
$14.35With the abundance of lighting functions and wanting to see and check them before I placed the shell on the frame, I decided I needed a way to see what was happening! I went to work and prototyped a small connector board with LEDs so I could... -
NixTrainz 4 - Decoder Buddy V1 - 8 Outputs - HO Scale
$14.351k ohm resistors The Decoder Buddy was developed for the 8 output decoders. This mother board does not include the 21-Pin Decoder. This mother board requires soldering. This printed circuit board is NOT INTENDED FOR USE IN A DC SYSTEM. However, if... -
NixTrainz 2 - Decoder Buddy Mini - HO Scale
$12.921k ohm resistors The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications. There has also been interest in HOn3 and S-Gauge applications. This mother board does not include the 21 Pin Decoder. This mother board... -
Digitrax DCS240+ - LocoNet® Advanced Command Station
$346.80Supports up to 400 locomotives and throttles. On-board USB port. Three RJ12 LocoNet ports Supports SoundFX and sound decoder programming using Digitrax SoundLoader app over USB. 5amp/8amp Booster with multi-scale capability. Built-in booster... -
SoundTraxx 884607 - BLU-2200 - Tsunami2 Bluetooth Decoder Steam-2 - HO Scale
$138.68The Blunami BLU-2200The BLU-2200 is a universal-style sound decoder that can be operated in three different ways: DC, DCC and Wireless mode. Using the Blunami app (iOS versions 8 or later), you can operate your locomotive with incredible ease of use... -
Train Control Systems (TCS) UWT-100 - Universal WiFi Throttle - Multi Scale
$299.95The UWT-100 Universal WiFi Throttle from TCS is the new standard in WiFi control for model railroads. This throttle brings a new level of ergonomic comfort and operational convenience to handheld controls. Instead of spending time with your head... -
Train Control Systems (TCS) 2016 - K0D8-G Decoder (8 Functions) - N Scale
$48.10The K0D8 is a N-scale drop-in decoder for Kato locomotives. Examples include the following: Kato: E7A See the Installation Pages for a full list of compatible engines! Note: The K0D8 line of decoders are available with different...