DCC Accessories

A 10 foot (120in) length of CAT6a cable. Useable in different applications such as connecting systems or DCC systems to computers.

A 7 foot (84in) length of CAT6a cable. Useable in different applications such as connecting systems or DCC systems to computers.

A 1 foot (60in) length of CAT6a cable. Useable in different applications such as connecting systems or DCC systems to computers.

A 1 foot (36in) length of CAT6a cable. Useable in different applications such as connecting systems or DCC systems to computers.

A 1 foot (12in) length of CAT6a cable. Useable in different applications such as connecting systems or DCC systems to computers.

 RJ12 cable with a length of 6 feet. For use with DCC systems such as Digitrax LocoNet. 

With our small relay, loads are controllable whose draw exceeds the decoder’s function output. Put the relay between output and load.

The new ESU PowerPack Mini can be wired to all fourth and fifth generation ESU decoders. It reliably supplies energy to your locomotive when traversing dirty track or long turnout ladders. With its energy storage (1 Farad capacity) the unit supplies...

Simplifies hookup, maintenance and troubleshooting of LocoNet. All connections plug-detachable. One RJ12 Throttle Jacks in front panel. IR and NET Indicator LEDs Two RJ12 LocoNet Jacks in rear for connection to other LocoNet devices.Use with 6 conductor...

All plug-in connectors for simple and easy installation and service. User defined as 16 DS reporting addresses in 1 to 2000+ DS range. Easy setup with device Option Switches (OPSW) Powered by 2mm DC jack, 8V min to 22V max. Configured to operate with...

RJ12 cable with a length of 12 feet. For use with DCC systems such as Digitrax LocoNet.

Nickel-Metal Hydride 600mAH 3.6v Rechargeable Battery Pack. Compatible with Digitrax throttles with 3-pin battery plug. Chargeable when inside Digitrax throttles, no need to remove the battery cover. No battery “memory” effect. Works...

The RX4 is a 4 zone transponder detector for use with Digitrax occupancy detection systems.  The RX4 enables you to not only see what blocks are occupied but also identifies what is there. RX4 Features: Know the layout zone location of...

The LNRP Xtra LocoNet Repeater Module Isolates and Protects LocoNet Layouts, it allows for greater expansion of the LocoNet system on large installations.  If a wiring or signal problems occur on any “standard” LocoNet section that the...

Lets you share decoders among locomotives 2” wires from Digitrax plug to DCC 8 pin plug Fits many HO locomotives with 8 pin socket

Lets you share decoders among locomotives 4” wires make it easy to install in N or HO 5-Pack

Digitrax Dummy Plugs for analog operation of Digitrax Easy Connect harnesses (5 pack)

Bracket will hold: DT602, UT6 and other legacy Digitrax throttles. Access to LocoNet & Power Ports when stowed away. Stores throttle when not in use or when charging. Fascia mounted. Durable design. Easy to install. 90 Day Warranty On Materials...

Bracket will hold: DT602, UT6 and other legacy Digitrax throttles. Access to LocoNet & Power Ports when stowed away. Stores throttle when not in use or when charging. Fascia mounted. Durable design. Easy to install. 90 Day Warranty On Materials...

Make programming your locomotives CV’s easier with Broadway Limited’s CV Setter! Designed for precision and ease of use, this essential tool allows you to quickly and simply customize and fine-tune the performance of your locomotives to meet...