DCC Accessories

This custom-designed holder can hold a single TCS throttle such as the UWT-50, LT-50, or UWT-100! Includes: 1 - 3D printed holder designed perfectly for UWT50, LT-50, and UWT-100. 1 - Bag of 4 Screws

Buy this pack and save on UWT-100 Throttle holders! This holder only fits the UWT-100. Includes: 3 - 3D printed holder designed perfectly for the UWT-100 3 - Bags of 2 Screws

Buy this pack and save on UWT-50/100 Throttle holders! This holder can be used with the UWT-50, LT-50, or UWT-100! Includes: 3 - 3D printed holder designed perfectly for UWT-50, LT-50, and UWT-100 throttles. 3 - Bags of 4 Screws

Works ONLY with the NCE Cab Bus. See WFD-31 for use with NCE Power Cab or CAB Bus Install this Wi-Fi device on your NCE layout to provide Wi-Fi access.  Then use the power of the TCS universal WiFi throttles on your NCE layout to control trains. A...

Works with the NCE Power Cab or Cab Bus. See WFD-30 for use with only NCE Cab Bus Install this Wi-Fi device on your NCE layout to provide Wi-Fi access.  Then use the power of the TCS universal WiFi throttles on your NCE layout to control trains. A...

NOTE: This product is intended for use with N-scale decoders and locomotives. TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA-N1 can power an...

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA5 includes an additional fifth supercapacitor, increasing the maximum capacity...

The WAUX-KA5 is designed for use with the TCS WOW101 ONLY TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA5 includes an additional...

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA5 includes an additional fifth supercapacitor, increasing the maximum capacity and peak...

Fascia mount Switch control device. Wire to DS74 input cable, or use DSXC4 for plug and play. Two color leds display current Switch state. Supplied with 3 wire control cable.

 This is a six pin, dual-row (2x3), 1.27mm (0.05") pitch, mini quick plug wired connector. This mini, quick plug connector is ideal for hardwire situations where you may have to remove or disconnect certain components from time to time. This...

Adds a program track output to the PowerCab. Prevents accidental programming of locos on your mainline track when using Program Track mode. Automatically disconnects your main line when in Program Track mode. Does not affect OPS mode programming /...

RJ12 cable with a length of 2 feet. For use with DCC systems such as Digitrax LocoNet.

SwitchPilot 3 Plus decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption. In order to facilitate the rather...

RJ12 cable with a length of 2 feet. For use with DCC systems such as Digitrax LocoNet.

 This is an alternate power supply for use with either the #22-018-1 Power Pack SX or #22-019 Smart Device Controller. Outputs DC13.5V - 2.2A US Style Plug only - please do not purchase this power supply if you are outside of the United States.

Cobalt-SS with Controller & Accessories Cobalt-SS 2 Pack – Small, Reliable, Super-Smooth Above-Board Turnout Motors, ready for DC or DCC use. Cobalt-SS 2 Pack – This pack contains 2x Cobalt-SS Above-Board Point Motors with...

Cobalt-SS with Controller & Accessories Cobalt-SS 2 Pack – Small, Reliable, Super-Smooth Above-Board Turnout Motors, ready for DC or DCC use. Cobalt-SS 2 Pack – This pack contains 2x Cobalt-SS Above-Board Point Motors with...

Control one twin coil "Snap" switch machine. Has capacitive discharge for low current draw of track power. Provides connections for two "local control" pushbuttons. You can control switches from your cabs and your control panels.

Servo Connection Cable (M-M) This 4" cable may be used to connect two Quik-Link devices.