DCC Decoders

This M4 decoder (see M4 for more information) comes connected to a 3.5" (8.89 cm) long harness which is terminated with a 8-Pin NMRA plug. From M4 listing 1011 Back EMF Load Compensation: Provides superior slow speed control and high performance...

This M4 decoder (see M4 for more information) comes connected to a 3.5" (8.89 cm) long harness which is terminated with a 8-Pin NMRA plug rotated 180 degrees from the standard orientation. This allows the decoder to fit better in certain applications...

This M4 decoder (see M4 for more information) comes connected to a 3.5" (8.89 cm) long harness which is terminated with a 8-Pin NMRA plug rotated 90 degrees from the standard orientation. This allows the decoder to accommodate the UK's narrow gauge...

This M4 decoder (see M4 for more information) comes connected to a 5" (12.7 cm) long harness which is terminated with a 8-Pin NMRA plug. From M4 listing 1011 Back EMF Load Compensation: Provides superior slow speed control and high performance...

A full featured, 4 function, 3.5" (88.9mm) harnessed decoder with a built in Keep-Alive™. The built-in Keep-Alive™ will keep your locomotive operating for 6-15 seconds without power (dirty track, bad contact, etc. etc.). Included is our...

This decoder is a M4 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a M-series decoder, but...

This decoder is compatible with the NEM651 standard interface found in some N-scale Bachmann and Fox Valley Models locomotives. The EUN651P-18 is wired to a 18mm harness terminated in a 6-pin NEM plug. Back EMF Load Compensation:Provides superior slow...

This decoder is compatible with the NEM651 standard interface found in some N-scale Bachmann and Fox Valley Models locomotives. The EUN651P-30 is wired to a 30mm harness terminated in a 6-pin NEM plug.   Back EMF Load Compensation:   Provides...

This full featured 2 function BEMF decoder is designed specifically to meet the needs of Z and N-Scale modelers who are converting their Z and N-Scale locomotives to DCC. Included is our auto-adjusting BEMF for outstanding slow speed performance and...

This full featured 2 function BEMF decoder is designed specifically to meet the needs of Z and N-Scale modelers who are converting their Z and N-Scale locomotives to DCC. Included is our auto-adjusting BEMF for outstanding slow speed performance and...

This full featured 2 function BEMF decoder is designed specifically to meet the needs of Z and N-Scale modelers who are converting their Z and N-Scale locomotives to DCC. Included is our auto-adjusting BEMF for outstanding slow speed performance and...

The Z2 is the smallest DCC decoder available! This direct-plug decoder has 2 lighting fuctions and enough current capacity to operate up to HO-scale locomotives! This decoder is designed for Z-Scale locomotives, or specialty installations in larger...

 The LokPilot 5 Nano DCC is the “twin” of the LokSound 5 Nano DCC. At 19.6 mm x 8.5 mm and a thickness of only 3.2 mm, it is exactly the same size as the corresponding LokSound decoder, but does without the sound functions. The LokPilot 5 Nano DCC...

8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 For Kato N P42 and similar 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma Output 8 Ohm 13mm round Speaker 100uF Capacitor

8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 For for Kato 4-8-4 FEF-3 and similar Drop-in light board replacement 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma Output 8 Ohm 9x18x4 mm oval speaker 100uF Capacitor

8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 For Kato SD80 MAC and similar 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma Output 8 Ohm 9x18x4 mm oval speaker 100uF Capacitor

8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 For Kato SD40-2 and similar Drop-in light board replacement 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma Output 8 Ohm 9x18x4 mm oval speaker 100uF Capacitor

Blunami will change the way you enjoy the model railroading hobby! The BLU-PNP8 is a universal factory board replacement sound decoder suitable for use in many manufacturer’s diesel models such as those made by Atlas, Athearn, and...

Blunami will change the way you enjoy the model railroading hobby! The BLU-PNP8 is a universal factory board replacement sound decoder suitable for use in many manufacturer’s diesel models such as those made by Atlas, Athearn, and...

Blunami will change the way you enjoy the model railroading hobby! The BLU-PNP8 is a universal factory board replacement sound decoder suitable for use in many manufacturer’s diesel models such as those made by Atlas, Athearn, and...