Description
AR1 Features:
- Cost effective automatic reversing for one reversing section or subdistrict
- User selectable trip current lets you adjust the AR1 to work with any scale or equipment on your layout
- Auto-Reversing manages polarity mismatches on the reversing track section without manually throwing electrical toggle switches or adding another booster
- 8 amp peak, 6 amp continuous Auto-reversing control for a single reversing district.
- Simple to wire 4 wire hookup, no locomotive wiring required
- No external power required, runs off track power
- AR1 operates with or without LocoNet, so it is compatible with all DCC systems.
Alternatives to AR1 for Automatic Reversing on your layout:1. Use a double pole, double throw switch to manually allow for reversing.2. Use one Digitrax booster set for automatic reversing and another set for normal operation.3. Use a PM42 Quad Power Manager to handle 4 power sub-districts. You can set these up to be automatic reversing or power managers to prevent short circuits from shutting down your layout.
Details
Store Location: |
P# 223 / Aisle 15B #3101 |
Customer Reviews
-
AR 1 Fixed the Issue!!
I tried using a Digitrax PM 74 to use on my layout utilizing the 4 blocks for auto reverse. While that worked on the two approach tracks to the turntables it did not work on my two reverse loops. It was hit and miss. I decided to buy two AR 1's, one for each reverse loop. They were easy to hook up and they worked like a charm! Excellent product!!
-
AR1
Fast shipping, which helps install them quickly.
-
auto reverser
Fast shipping, wiring in place now!
-
Digitrax AR1
Makes adding a reverse loop to your layout simple. Four wires and you ready to go.
-
Digitrax AR1
Product works great. Digitrax fell into the "smaller" is better trap. Could of made it a little bit bigger and put a large terminal block on it. The small one makes to hard to wire.
-
easy...
Install and forget, it really is that easy
-
DigiTrax AR1
Works great on all three of my reverse loops. Easy to install and adjust.
-
AR1 by Digitrax
Exactly what I needed for my reverse loops and crossovers
-
Digitrax AR-1 Auto Reverse...
Product works. Must be fair, I am a novice model railroader and know very little about electronics. There are no instructions on how to install on a Kato Turntable. Lots of info on Youtube, but pick your sources carefully. Did get it installed correctly and is works fine. Thanks Midwest for the fast processing and shipping.
-
Was convinced I needed one but then found out I...
Was convinced I needed one but then found out I could do it with a simple double throw double pole switch. So for now I won’t be using it.
