Digitrax

Convenient pre-made, pre-tested cables, ready to use on your layout. LocoNet Wiring is a snap with these cables

Convenient pre-made, pre-tested cables, ready to use on your layout. LocoNet Wiring is a snap with these cables

Use with crimper tool to make custom length LocoNet cables & replace broken plugs.

Fits many 8-pin Medium Socket DCC-Ready HO locomotives Integrated DCC Medium Plug for track, motor and function control, allows-decoder to be moved between different locomotives Series 7...

Isolates up to 3 segments of your LocoNet layout Primary P-port bi-directional LocoNet repeater to A/B/C expansion ports Fault-tolerant A/B/C ports automatically disconnect and reconnect...

LocoNet Universal Panel and 3 Amp Z Scale Voltage Reducer 6 LocoNet Jacks for use with all scales Reduces track voltage by 4 or 6 volts at 3 amps for safer Z Scale locomotive operation with...

Fits many locomotives and Rolling stock Digitrax Easy Connect Harness 8 Ohm 16 x 26 x 9mm Box Speaker Sound only Decoder with SoundFX 8 CV-Selectable Sound Schemes Included

Simplifies hookup, maintenance and troubleshooting of LocoNet. All connections plug-detachable. One RJ12 Throttle Jacks in front panel. IR and NET Indicator LEDs Two RJ12 LocoNet Jacks in rear for...

All plug-in connectors for simple and easy installation and service. User defined as 16 DS reporting addresses in 1 to 2000+ DS range. Easy setup with device Option Switches (OPSW) Powered by 2mm DC...

Features: Wired Mobile Decoder with SoundFX® & FX3 Function for most HO and many N scale Locomotives. Preloaded with selectable generic steam and diesel sound...

Fits many Kato HO legacy locomotives Drop-in light board replacement 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output 8 Ohm 26x16x9 mm box speaker w/330uF Capacitor

Fits Kato, Athearn Genesis, Stewart, other HO locomotives Drop-in light board replacement 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output 8 Ohm 26x16x9 mm box speaker w/330uF Capacitor

Fits many 21MT equipped HO locomotives Digitrax 21-pin MT socket 1.0 Amp/2 Amps Peak 8 FX7 Functions, 300ma Output

Fits many 21MT equipped HO locomotives Digitrax 21-pin MT socket 1.0 Amp/2 Amps Peak 2 FX7 Functions, 300ma Output

Fits E24 socket locomotives N-Scale Mobile Decoder 13 FX3 Functions, 200mA capacity Motor drive at connector capacity

Nickel-Metal Hydride 600mAH 3.6v Rechargeable Battery Pack. Compatible with Digitrax throttles with 3-pin battery plug. Chargeable when inside Digitrax throttles, no need to remove the battery...

Fits E24 plug N locomotives and compatible units Plug-in E24 socket Motor drive at connector capacity 13 FX7 Functions, 200mA capacity 8 CV Selectable Steam & Diesel Sound Schemes Included

8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits Atlas N FA-1 locomotive and others Plug-in Next18 connector Motor drive at connector capacity 6 FX3...

Fits Kato AC4400 or compatible HO locomotives Drop-in light board replacement 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output 8 Ohm 28 mm round speaker w/330uF Capacitor

Fits Kato SD38-2 or compatible HO locomotives Drop-in light board replacement 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output 8 Ohm 28 mm round speaker w/330uF Capacitor