N Scale

N Scale 2 pair assembled 1016 couplers. Brown. This coupler is designed for a mounting height of .279”, or .293” with shim provided, for a mounting height above rail top. For other mounting heights above .279”, use appropriate shims between mounting...

2 pair assembled 1016 couplers. This coupler is designed for a mounting height of .279”, or .293” with shim provided, for a mounting height above rail top. For other mounting heights above .279”, use appropriate shims between mounting platform and top of...

2 pair Assembled 1015 couplers Brown. This coupler is designed for a mounting height of .279”, or .293” with shim provided, for a mounting height above rail top. For other mounting heights above .279”, use appropriate shims between mounting platform and...

2 pair Assembled 1015 couplers. This coupler is designed for a mounting height of .279”, or .293” with shim provided, for a mounting height above rail top. For other mounting heights above .279”, use appropriate shims between mounting platform and top of...

2 pair short shank & 1 pair medium shank with draft gear boxes.

Unassembled RDA Body mount couplers. 2 pair short shank & 1 pair medium shank with draft gear boxes.

Accurate to N scale! Three dimensional laser etched shingles sheets With peel-and-stick backing Plus ridge cap strips Two sections on one sheet in each package Covers a roof approx. 7€L x 3.25€W

Five strips of barn yard fence and fence bracing Two gates sections  338 scale feet of scale fence.  (Approx. 25 inches) Made of micro plywood.  Instructions included.

Five strips of weathered fence with broken boards and knot holes. Three gate sections A total of 338 scale feet of fence and gates. (over two actual feet) All parts are etched by the laser. Made of rigid fiber board  "No-glue" fence bracing made of...

Each kit is laser cut from rigid fiber board. Eight 38 scale foot strips of picket fencing and fence bracing with a peel-and-stick tape backing for easy assembly.   Six gate sections.  336 scale feet of fence.  (Approx. 12-3/4 inches) Instructions...

Each kit is laser cut from rigid fiber board. Eight 38 scale foot strips of picket fencing and fence bracing with a peel-and-stick tape backing for easy assembly.   Six gate sections.  336 scale feet of fence.  (Approx. 12-3/4 inches) Instructions...

Every railroad needs an overhead crane to lift heavy objects from railcars to trucks for delivery to its final destination.  They are used for lifting quarry stones, pre cast concrete parts, steel coils, steel rails, large crates or anything that...

Diesel Engine Houses like this were constructed along railroads at most rail yard facilities.  After steam engine roundhouses were retired, diesel engines needed a more modern facility in which to maintain them.  These buildings often included...

The Model: Based on Billboards common across the country from the early 1900's through the 1960's.    What's in the kit?  Two Billboard kits made from laser cut plywood, basswood, and fiber board with peel and stick trim plus a selection of vintage...

Based on an actual prototype.  Coal Elevators were usually built in the early 1900's near several grain elevators.  Coal was used by every house and business for heating and cooking before the advent of natural gas furnaces and stoves.  Everyone in town...

The Model: A perfect small town American whistle stop depot.  Based on a Milwaukee Road prototype.  The original was built in the late 1800's and still stands today!  This depot could be found on a standard gauge or narrow gauge railroad.  Loaded with...

The Model: Remember that little building along the road you stopped at for that ice cream treat?  Well this is that classic roadside ice cream stand with lots of colorful advertising signs and it includes two benches to enjoy your treat.  Designed to fit...

You remember Ellie's House.  Not far from the tracks and across the street from the depot.  As a kid you saw her sitting on the front step or looking out the bay window whenever a train would arrive in town.   The kit is based on a Victorian era Gothic...

Every town has one by the tracks, the old junk yard scrap dealer working out of his post war Quonset hut.  Now you can create the same scene on your layout.  The kit includes precision laser cut wood parts and loads of extras including numerous Monroe...

Unload all your heavy equipment with this prototypical railroad loading ramp. Precision laser cut wood parts are included with tab and slot construction for easy, quick, and sturdy construction.  Included are TWO loading ramps and instructions.