N Scale Locomotive and Rolling Stock Details

Prototype History Each railroad has unique specifications on motive power and freight cars.  As new locomotives are delivered and older models overhauled, many railroads re-place headlights, calling for 'removed headlight cover plates' to seal the...

BLMA #71 - Prime Air Conditioner - N Scale Model Description: Our N Scale Air Conditioners are made from fine-scale photo-etched metal allowing us to include every detail possible, even down to the correct number of rivets! Model Features: €¢ Etched in ...

Model Description: Our N Scale Air Conditioners are made from fine-scale photo-etched metal allowing us to include every detail possible, even down to the correct number of rivets! Model Features: €¢ Etched in .005" Metal €¢ Accurate Dimensions €¢ Razor...

Model Description: This fan set is designed to retrofit/upgrade the fans on later generation EMD's which includes all models in the SD70, 80 and 90 range. Each set includes one 60" Dynamic Brake Grill and three sets of 53" Radiator Fan Grills with Blades...

BLMA #65 - Modern Rear View Mirrors (8) - N Scale Prototype History: Found on nearly all diesel locomotives, Rear View Mirrors are mounted onto locomotive cab sides for reverse visibility for engine crews. Model Description: This set includes two styles...

BLMA #64 - Locomotive Wind Deflectors - N Scale Prototype History:Found on a good number of diesel locomotives, Wind Deflectors were mounted onto locomotive cab sides to do what their name says - deflect wind.  Similar to a rear view mirror, wind...

BLMA Modern EMD Cut Levers - 5 Pair

15" Drop Grab IronsBLMA Prototype History:All railroad rolling stock features ubiquitous grab irons.  Generally made from roughly one inch diameter metal rod, they provide support and safety for railroad crew members. Model Description:These highly...

BLMA 58 - 18" Straight Grab Irons (20) - N Scale Prototype History: All railroad rolling stock features ubiquitous grab irons.  Generally made from roughly one inch diameter metal rod, they provide support and safety for railroad crew members. Model...

Prototype History: All railroad rolling stock features ubiquitous grab irons. Generally made from near inch-thick metal rod, they provide support and safety for railroad crew members. Model Description: Struggling to install grab irons on your model?...

Prototype History: Developed in the late 1960's for rolling stock identification, the ACI plates became a common sight throughout the 1970's and beyond.  Ultimately, the program failed due to dirty, unreadable railcars and more sophisticated reading...

Prototype History: For the first time ever in N Scale, you can easily add freight/passenger car cut levers to your rolling stock.  Our set features eight pairs of the most common cut levers around along with four different mounting configurations for...

Prototype History: Cut Levers (or 'Cut Bars') are used to vertically lift or pull the coupler pin on all rolling stock. Simply put, these long, horizontal levers give train crews the leverage needed to open or close a coupler. This style of Cut Lever is...

Prototype History: This style of cut levers is common on all EMD diesel locomotives produced after the early-mid 1970's. Each set includes one pair of chemically-etched, Modern EMD Cut Levers and associated mounting pins. Model Features: €¢ Etched in ...

Prototype History A majority of EMD's mid-series locomotives (GP30-60 & SD40-70+) use a very standard looking pilot.  Because these pilots feature numerous details that require drilling, we've designed a simple layover for EMD pilots that will...

Prototype History Disliked by many railroaders, Remote Controlled Locomotives (RCL€™s) are becoming a common site around the country.  Our new set of numerous RCL Antenna Stands will make your modern switching fleet stand out! This detail set is etched...