Rocket Tools

 Tube Couplers! 6 pieces. 3 popular sizes. 2 each : BT5 – 1 inch long 2 each : BT20 – 0.75 inches long 2 each : BT50 – 1 inch longIncludes 6 Tube Couplers in 3 different sizes. BT5, BT20 and BT50. Perfect for connecting 2 body tubes of the same size...

NC-20 Nose Cone will fit BT-20 body tubes. Each package of nose cones contains four nose cones for use with the BT-20 body tubes. Includes four nose cone pins for shock cord and shroud line attachments.

Contains two sizes of shock cords with mounts and instructions. Contains two 1/8 in. x 18 in and one 1/4 in x 36 in. rubber shock cords and four shock cord mounts.

NC-50 Nose Cones will fit the BT-50 body tubes. Each package of nose cones contains five nose cones that will fit the BT-50 body tubes. All have eyelets or nose cone pins for shock cord and shroud line attachments.  

High quality spiral wound paper tube for kits using the BT-50 body tube.Use tube couplers to connect tubes of the same diameter.Three tubes per package.Works with the NC-50 nose cone.

A high quality spiral wound paper tube for kits using the BT-20 body tube. Use tube couplers to connect tubes of the same diameter. Four tubes per package. Use with the NC-20 nose cone

Heavy duty plastic guides slip easily onto your body and allows for precision cuts for specific lengths. 5 guide sets are included. BT5, BT20, BT50, BT55 and BT60. A must have for all rocket builders! You won’t find an easier way to shorten that...

Multiple ways to use. Great for assembly or display! Just like in real rocketry, rocket cradles are used during construction, storage and transportation of rockets. Use your rocket cradle to hold your rocket on its side while you work to keep the rocket...

Model Rocket Display stand for all of your C11, D & E engine size model rockets! 3 to a pack. What a great value! Display your rockets in style! Available in mini, standard and C11, D & E engine mount sizes.

Model Rocket Display stand for all of your standard engine size model rockets! 3 to a pack. What a great value! Display your rockets in style! Available in mini, standard and C11, D and E engine mount sizes.

Model Rocket Display stand for all of your mini engine size model rockets! 3 to a pack. What a great value! Display your rockets in style! Available in mini, standard and C11, D & E engine mount sizes.

Flame resistant recovery wadding protects the recovery system and is necessary to launch model rockets. The flame-resistant wadding is required in most Estes rockets unless they are tumble recovery. Recovery wadding is installed in between the motor and...

Printed two color design. Preassembled 15 in. (38 cm) Parachute. This 15 in. (38 cm) parachute is preassembled and ready to use on model rockets that require a 15 in. parachute. The perfect size when an 18 in. parachute is too big and a 12 in. parachute...

Red color. Preassembled 12 in. (30.5 cm) Parachute. This 12 in. (30.5 cm) parachute is preassembled and ready to use on model rockets that require a 12 in. parachute. The shroud lines come attached, and it simply attaches to the nose cone by sliding the...

Fully Assembled A sophisticated and lightweight electronic payload for accurately measuring your model rocket altitudes. Fully Assembled A must have for all rocketeers! And a great price too. The Estes Altimeter has a 4 digit LCD read out and displays in...

Launch rod with extra strength and length for larger rockets. Going big? You might need a stronger launch rod, like this 3/16 diameter rod  built for heavier rockets and higher power motors. It attaches to the launch pad, and your Estes rocket...

How high did it really go? Next time, measure it with this easy to use device. Pull the trigger, follow the rocket in the sights to apogee, then release the trigger to lock the reading. It is that easy. No need for hundreds of dollars of altimeters! The...

FAST & ACCURATE fin alignment Great for three or four finned rockets Fits body tubes ranging from BT-20 to BT-80 A precision molded accessory that makes it easy to glue three or four fins to various sized body tubes ranging from BT-20 to BT-80...

Gets it straight, every time Allows for accurate and consistent fin placement Works will all Estes body tubes A heavy-duty, 18 in. long precision plastic marking tool that makes drawing accurate fin or launch lug lines the length of any size body...

The tube marking guide is an easy way to mark your fin and launch lug placement. The marking guide is a must for any rocket builder! Easy way to mark fin and launch lug placement lines. Also includes a fin gluing jig.