RslaserKits

Kit contains 4 - 24 foot ladders.

This kit has the parts for 9 lumber stacks. Each stack is 4 scale feet wide and 30 inches tall. You get three each at eight, twelve and sixteen feet long. Each stack is made from 6 layers of 1/16...

Include 6 - 24 scale feet long 6 foot high panels and all are different as to ageing and sections cut out.

Fence leans to the side about 9 degrees from vertical for the falling over look. Include 6 - 24 scale feet long 6 foot high panels and all are different as to ageing and sections cut out.

A sheet includes 8 wheels at 48” and 54" in diameter and 8 wheels at 66” and 72" In diameter. cut from .024 laser board

These are the perfect starter kit for your fist wood kit. The kit includes 6 laser cut picnic tables and 3 pages of directions with color photos. There are only nine parts per table so it's a good...

Kit contains enough 5 foot scaffolding sections and braces to do a 30 ft. high by 70 ft long wall. 24 sections of 5 ft. by 5 ft. frames. 50 sections of bracing and 50 double wide planks.

Delivery wagons based on drawing and Photos of wagons used from the 1850’s till the early 1900’s. Kit contains parts for Two wagons cut from laser board and micro plywood. Decals for four companies...

Stair kit has 12 stringers, 80 treads and an assembly jig.

This would look great around that hot tub or the back yard on any house. You get 4-24 foot sections for 96 scale feet.

Note the frame on back side. All laser cut all you need to do is glue the frame on and set on your layout. This fence has 144 scale ft and no gate.

The fence is a scale 6 foot tall Comes with with laser cut support framing, 4 - 24 ft. sections of fence and a 4 ft gate section for a total of 100 scale feet of fencing. Has boards on both sides of...

Stair kit has 12 stringers, 80 treads and an assembly jig.

You get 12 - 24 foot wood trusses, 12 sheets of T-111 siding and 16sheets of plywood, two 16 ft ladders plus as an added bonus 3 saw horses.

Kit contains 2 Farm Wagons.

Patterned after many of the home made cars found on logging line and branch line around the country. They had a small shack built on a flat car for storage and were even used as freight cars for...

The kit has parts to make one flat car. The price is less trucks and couplers. Takes Kadee archbar with #115 or #178 couplers.

Patterned after many of the home made cars found on logging line and branch line around the country. They had a small shack built on a flat car for storage and were even used as freight cars for...

Includes metal standing seam roofing, rolling on porch, Laser cut peel and stick board and batten siding and signs for four businesses. Note: This is the front Facade only. Kit Includes the front...