RslaserKits

The camp bunk house kit is base on those found here in the pacific northwest in the early 1900s through the end of railroad logging. Most of these houses were build on skids then loaded on a flat car...

This kit is based on one used by the Manary Logging Co. in the 1920's. It also could be used today as a flower-garden shop or Artist Studio and look great. All 20 of the front and side windows are...

This car was made to replicate a abandoned passenger car that has seen much better days. These can still be found in yards or on abandoned lines.

Based on one of many log cabins built by the early settlers all over the country. Many are still being used today as summer or hunting camps and at resorts as overnight lodgings. Footprint 2.3” x 2...

Kit includes 1/8 inch thick laser cut and engraved walls, interior trusses, metal standing seam roofing. Footprint: 5.5 ” x 7.5”.

Reminiscent of the early days of railroads the RS Laserkits Single Stall Engine House and Side Shop is a blend of several of the features seen on many of the short lines, logging bases, and mines...

Reminiscent of the early days of railroads the RS Laserkits Single Stall Engine House and Side Shop is a blend of several of the features seen on many of the short lines, logging bases, and mines...

Covers 18 square inches.

2-Sheets 4.25 by 6 inches, will cover a roof area 24 square inches or 4200 square scale feet.

This kit has the parts for 27 lumber stacks. Each stack is 4 scale feet wide and tall. You get nine each at eight, twelve and sixteen feet long. Each stack is made from 6 layers of 1/32 Basswood...

Kit contains enough 5 foot scaffolding sections and braces to do a 30 ft. high by 70 ft long wall. 24 sections of 5 ft. by 5 ft. frames. 50 sections of bracing and 50 double wide planks.

Kit comes with 32 posts and enough strip wood rail for a fence of between 19 and 25 inches long, depending on post spacing. That is between 250 and 330 scale feet.

Kit comes with 32 posts and enough strip wood rail for a fence of between 19 and 25 inches long, depending on post spacing. That is between 250 and 330 scale feet.

This would look great around that hot tub or the back yard on any house. You get 4-24 foot sections for 96 scale feet.

The fence is a scale 6 foot tall Comes with with laser cut support framing, 4 - 24 ft. sections of fence and a 4 ft gate section for a total of 100 scale feet of fencing. Has boards on both sides of...

You get 12 - 24 foot wood trusses, 12 sheets of T-111 siding and 16 sheets of plywood, two 16 ft ladders plus as an added bonus 3 saw horses.

Kit contains 8 - 60 Foot Span Trusses with a 4/12 Slope.

Kit contains 12 - 40 Foot Span Trusses with a 4/12 Slope.

Kit contains Laser cut wood parts and Grandt Line detail parts to make one tank and tower. Pump house is included. Footprint: 1-1/4” by 1-1/4”.

Jeff's (home of the best Burger in town) is a small road side stand that is modeled after one near Salem, OR and will fit in most any era and has many uses. Kit included Tichy and Grandt Line parts...