RslaserKits

A prefect small brick building for that downtown main street. Includes interior parts including a partition wall with teller windows, two tables for the lobby and interior lighting by a supplied LED...

This kit is typical of many of the small town General Stores found all over the country. With store in front and warehouse/mill in the back. Kit contains laser cut wood walls, Tichy windows and our...

Harris door is a background kit and is modeled after some track side industries found in most towns that had manufacturing. Footprint: 8 3/8 by 1 1/2 inches.

Asher Supply is a small Stone building that has many uses. Could be a track side freight house or warehouse. Or a in town contractors supply house. Footprint: 2 3/8 by 6 1/2 inches.

A typical downtown Brick building found on most downtown Main streets. Two Stores on the main floor and Apartment above with a back deck and stairs. Includes laser cut task board and basswood walls,...

A saloon built in Virginia City, Montana about 1875. It was constructed primarily of rough 6x12 timbers, laid up log cabin style. The finished and ornamented false front provided a sharp contrast to...

The Courter Factory was built in Cobleskill NY in 1866 and over the years had many uses. The building was used by Stanton Courter as part of his lumber and manufacturing companies. By the 1920’s it...

A wood framed farm house patterned after ones back in my old home town area in upstate NY. Includes Pre-colored slate roofing, Tichy windows and doors and Grandt-Line chimneys. Footprint: 2-1/2” by...

A brick farm house patterned after ones back in my old home town area in upstate NY. Includes Pre-colored slate roofing, Tichy windows and doors and Grandt-Line chimneys. Footprint: 2-1/2” by 3”.

A run down, falling down Garage with outside bracing holding it up. Kit includes interior stud framing, Exterior siding and engraved nail holes, siding cut out to expose the framing, laser cut...

Kit based on the light house built in 1873 and in use until 1929. Light NOT included. Footprint: 2" by 2 3/8".

The kit builds 5 camp shacks based on the ones used by Consolidated Timber in North western Oregon in the 30’s. Kit contains parts to build 5 camp shacks. Included are 10 side walls , 12 end walls,...

Based on the Canadian Pacific enclosed water tower. The kit includes laser cut parts and Grandt-Line detail parts. Footprint: 2.25" x 2.25" x 4" tall.

This shed is based on a speeder shed on the late John Allen's G&D layout. Kit includes, fuel oil tank code 40 weathered rail for the speeder track strip wood for the rail in fill decks. Speeder also...

Carl’s cabin is like many that were found in logging and mining camps. Today you will find them used as hunting camps, vacation getaways and can even be used as a wrong side of the tracks house...

A prefect small building with many uses. Use as a Freight house, warehouse or small factory. Includes Lean-to extension, several window, door and chimney options plus 12 wood barrels and 10 pallets,...

Canadian Northern Railway Standard 24' x 35' Freight House. This kit was based on the original 1907 drawings. Foot Print: 2.25" x 2.625"

The Silver Cliff Colorado firehouse and town hall was built in 1879 and still stands today. It is one of the few original building still left in the small town and today is used as a Museum...

A small country store that fits in any era from the 1800’s to today. Contains laser cut wood walls, Laser board windows and doors plus laser cut roofing. Footprint: 1 3/8" x 2 1/8".

A concrete block engine house/car repair building that could be found on any branch line or short line. Kit includes the service pits, metal roofing ,laser cut windows and trim and laser cut heavy...