RslaserKits

This kit has the parts for 27 lumber stacks. Each stack is 4 scale feet wide and tall. You get nine each at eight, twelve and sixteen feet long. Each stack is made from 6 layers of 1/32 Basswood...

Kit contains enough 5 foot scaffolding sections and braces to do a 30 ft. high by 70 ft long wall. 24 sections of 5 ft. by 5 ft. frames. 50 sections of bracing and 50 double wide planks.

Kit comes with 32 posts and enough strip wood rail for a fence of between 19 and 25 inches long, depending on post spacing. That is between 250 and 330 scale feet.

Kit comes with 32 posts and enough strip wood rail for a fence of between 19 and 25 inches long, depending on post spacing. That is between 250 and 330 scale feet.

This would look great around that hot tub or the back yard on any house. You get 4-24 foot sections for 96 scale feet.

The fence is a scale 6 foot tall Comes with with laser cut support framing, 4 - 24 ft. sections of fence and a 4 ft gate section for a total of 100 scale feet of fencing. Has boards on both sides of...

You get 12 - 24 foot wood trusses, 12 sheets of T-111 siding and 16 sheets of plywood, two 16 ft ladders plus as an added bonus 3 saw horses.

Kit contains 8 - 60 Foot Span Trusses with a 4/12 Slope.

Kit contains 12 - 40 Foot Span Trusses with a 4/12 Slope.

Kit contains Laser cut wood parts and Grandt Line detail parts to make one tank and tower. Pump house is included. Footprint: 1-1/4” by 1-1/4”.

Jeff's (home of the best Burger in town) is a small road side stand that is modeled after one near Salem, OR and will fit in most any era and has many uses. Kit included Tichy and Grandt Line parts...

Contains laser cut laser board walls, Laser board windows and doors. plus Fire escapes. Footprint: 2.25” x 3.0”

A small Gambled roofed barn as found on many Farms around the country. This design is ageless and has been used since the mid 1800’s. Footprint - 2 9/16” x 4 1/2” for the base.

A road side stand that can be used any were in any era. You will find many uses for this little building. Includes interior display cabinets plus a downloadable interior framing sheet by Clever...

The original Keystone Mill was built in the late 1900s and still stands today as a lumber yard in Pennsylvania. Each kit features a foundation cast by Motrak, board-on-board laser-cut siding, and...

Walls are laser cut bass wood with Tichy windows and doors, laser cur basswood dock framing with a ply deck with engraved nail holes. Set of laser cut stairs and assembly jig. Footprint: Building - 1...

The freight house at the crossing of the Mono and Nickel Plate Railroads at Linden Indiana. Footprint: 3 3/8” x 4 1/4“

Based on a store in Jefferson Oregon. Footprint: 1 1/4” x 2”

Randolph Depot RslaserKits Craftsman Laser Cut Kits. Like all craftsman kits these are unfinished and will take sometime to build and finish.The perfect station for any railroadThis kit has been...

Wood Truss Rod Bridge (55' Span)