Circuitron

Digitally Recorded Grade Crossing Bell Speaker and 3D Printed Baffle Housing Included 8-18 volt AC or DC (preferred) input

This cable and actuator is designed to be used with the Remote Signal Activator (sold separately). Instructions for assembly are provided with the Remote Signal Activator.

Remote Signal Activator Mounting bracket and mechanism utilize the TORTOISE (not included) and a special drive wire cable assembly to remotely actuate any crossing gate, train order board, or...

6 pack of the Circuitron Smail with Terminal Block Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately).  Compatible with all DCC...

6 pack of the Circuitron Smail. Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately).  Compatible with all DCC systems that...

Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately).  Compatible with all DCC systems that provide accessory address control...

Smail (Slow Motion Actuator with Integrated Logic) features same size and mounting as the TORTOISE (sold separately).  Compatible with all DCC systems that provide accessory address control...

A thin, precise, laser-cut plastic template for use when multiple TORTOISE™ switch machines are to be installed in the standard under-layout configuration.

The CIRCUITRON Remote Tortoise Mount is capable of driving up to 2 cables and actuators at the same time, thus allowing a single TORTOISE to actuate two sets of...

The CIRCUITRON Remote Tortoise™ Mount consists of a molded base mechanism to which the TORTOISE™ (not included) is mounted. An adjustable lever arm is fastened onto...

  Prototypical turnouts don't snap open and closed, they move slowly. This easy-to-mount switch machine features prototypical slow-motion action-three seconds to complete throw...

  Prototypical turnouts don't snap open and closed, they move slowly. This easy-to-mount switch machine features prototypical slow-motion action-three seconds to complete throw...

 Prototypical turnouts don't snap open and closed, they move slowly. This easy-to-mount switch machine features prototypical slow-motion action-three seconds to complete throw. Easy-to-mount...

Use with the Tortoise Switch Machine and an upper or lower quadrant semaphore-style signal.  Includes al the logic circuitry to drive the signal to all three positions. Works with BD-1 or BD-2...

The CIRCUITRON DT-3 Single Direction Grade Crossing Detection Circuit utilizes our proven OptoElectronic Detection and will provide accurate grade crossing action for a single locomotive or a 100 car...

CIRCUITRON designed the DT-2 to be the most advanced DC track power grade crossing detection circuit available at any cost. It is completely independent of train length and it will duplicate...

The CIRCUITRON DT-1 is a bi-directional detection circuit designed for DC track power that provides an output whenever one of its Opto-Sensors is covered by a piece of rolling stock. Absolutely no...

The CIRCUITRON FL-2 is designed to be controlled by the output from one of our Grade Crossing Detection circuits. The FL-2 may also be easily wired for continuous flashing or for manual control with...

The CIRCUITRON EOT flasher includes the same LED as the CF-1. Refer to the description of the CF-1 regarding modifications to the LED which will result in a realistic HO scale device. After...