DCC Decoders

 The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible...

Fits many Kato N-locomotives Drop-in light board replacement decoder for Kato “K1” form-factor boards 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma output Replaces both the DN163K1C &...

The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all characteristics, however, the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This...

LokProgrammer set: LokProgrammer unit, US 110V power supply, and serial to USB PC cable Dimensions: 95mm (3.74") x 85mm (3.35") x 22mm (0.87")   You want to listen to the sound spectrum of your...

A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best...

The Decoder Buddy V5 and V5B were developed for the 12 output decoders and include a couple added features. This mother board does not include the 21-Pin Decoder. This mother board requires soldering...

1k ohm resistors The Decoder Buddy Mini was developed to fit into smaller steam and diesel applications.  There has also been interest in HOn3 and S-Gauge applications. This mother board does not...

2 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax 9-Pin Harness Motor 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma Output New sound...

8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax 9-Pin Harness Motor 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma Output New sound...

SKU: 1293 This full featured 4 function BEMF decoder is designed to fit the following locomotives: Kato N-Scale EMD SD40, EMD SD70MAC, EMD SD70/75M, GE C44-9W, GE AC4400W, "Gevo" ES44AC, and Athearn...

Fits many older Atlas N locomotives Mobile Decoder Drop in “A0” Atlas light board replacement decoder 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma output

The CN-GP is a N-scale drop-in decoder for Atlas, Kato, and Life Like locomotives. Examples include the following:   Atlas: GP7/GP9 GP30/GP40/GP60   Kato: SD40   Life Like: GP18

Decoder tester (Replaces 51900), NEM651, NEM652, 21MTC, PluX22, Next18, single wires. With motor, LED-Monitor and 20mm speaker. New socket to accept decoder tester extension 53901Â Perhaps you are...

DS51K1 Stationary Decoder For Single Kato Unitrack Turnouts, easy cost effective way to add DCC control to your Kato Unitrack Turnouts.     DS51K1 Features:  Stationary Decoder For Single Kato...

 The LokSound 5 micro DCC Direct Kato USA has been specially developed for installation in track N vehicles of the Kato USA brand: Most diesel locomotives of this manufacturer are installed in the...

Fits many HO locomotives Digitrax 9-Pin Harness Socket 1.0 Amp/2 Amps Peak 2 FX7 Functions, 200ma Output

A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best...

Fits New InterMountain N Scale SD40-2 released 2017 1.5 Amp/2 Amp Peak 6 FX3 Functions, 0.5 Amp .329” x 2.603” x .065”8.36mm x 66.11mm x 1.64mm

 The LokPilot 5 Nano DCC is the “twin” of the LokSound 5 Nano DCC. At 19.6 mm x 8.5 mm and a thickness of only 3.2 mm, it is exactly the same size as the corresponding LokSound decoder, but does...

A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best...