Electronics

The CN is a N-scale drop-in decoder for older Atlas, Kato, and Intermountain locomotives. Examples include the following: Atlas: GP7/GP9 Old Style GP30/GP35 Old Style SD35/SD50/SD60/SD60M B30-7/B40-8 GP38 GP40 DCC-Ready SD9...

A full featured, 4 function, 3.5" (88.9mm) harnessed decoder with a built in Keep-Alive™. The built-in Keep-Alive™ will keep your locomotive operating for 6-15 seconds without power (dirty track, bad contact, etc. etc.). Included is our...

This motherboard is designed to replace the existing circuit board in a Bachmann Baldwin J-Class 2-8-2. This board is designed with High Profile Pins to Receive a Soundtraxx or ESU decoder and provides an onboard Keep Alive® (KA4 style)...

The WOW501 is a universal, 5 Amp sound decoder for large-scale locomotives. The WOW501 includes Keep Alive® on-board for stutter-free operation. Function 5 and 6 may be programmed to control a smoke unit with a coil and fan. By programming CV58...

Intermountain and Bowser speaker housing for the TCS 35mm x 16mm oval speaker (included). This speaker replaces the existing one in the sound equipped models and DCC sound ready locomotives. This speaker kit includes two M2-.4X6 screws for...

Intermountain speaker housing for the TCS 35mm x 16mm oval speaker (included). This speaker housing is a cantilever style and is secured to the chassis via the two included screws. Dimensions: 1.62" x 0.71" x 0.28" or 41.25mm x 18mm x...

Universal speaker housing for the TCS 28mm round speaker (included). This housing has limited use because of the open back however it can be useful in some situations. It can be useful for example for mounting the speaker on the underside of a coal load...

Speaker Enclosure for 2 sugar cube speakers. Box may be glued together or screwed together. Speakers and screws not included. 16.4mm x 35.25mm x 9.5mm 4 mounting holes for 2mm screws

Fits many 8-pin Medium Socket DCC-Ready HO locomotives Integrated DCC Medium Plug for track, motor and function control, allows-decoder to be moved between different locomotives Series 7 Enhanced Decoder Features 6 Digitrax FX7 Functions-Control...

Features: This 2 function FX3 decoder is designed to fit MicroTrains Z scale GP-35 locos.  128 Speed Step operation (14 or 28 steps can also be used) Momentum with acceleration and deceleration. Normal Direction of Travel is user selectable. 3...

 The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into...

The LokPilot 5 Fx is a function decoder without motor output and therefore perfect for installation in control cars or function models. Because it talks DCC with RailCom® as well as Motorola® and Selectrix, it can be used with all common...

ESU 50322 Speaker Monacor Sp6/4SQ, 59mm Round 8 Ohms, for PIKO G/LGB Loks 59mm Round 8 ohm 1-2 Watts for PIKO G/LGB Loks The speaker is specifically selected for use with the LokSound XL decoder. Additionally, the speaker is suitable...

These units provide a direct plug-in to Athearn and other locos equipped with NMRA 8 pin DCC and include Silent Running torque-compensated motor drive for ultra smooth low speed performance. Motor rating 3/4 Amp continuous, 1.2 Amp stall. All four...

The K4-LK is a function-only lighting expansion board which has been designed to be installed into the KATO N-scale MP36PH. This board has three hookup wires - One RED Anode(+) wire (center) and two GREEN function wires(-). Simply solder the wires to...

This decoder is a T6 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a T-series decoder, but...

This decoder is a M4 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a M-series decoder, but...

This motherboard is designed to replace the existing circuit board in a Walthers Proto 2000 Heritage 0-6-0 and 0-8-0. This board is designed to receive a WOW121 or EU621 decoder and provides an onboard Keep Alive® for uninterrupted performance over...

This motherboard is designed to replace the existing circuit board in a Walthers Proto 2000 Heritage 0-6-0 and 0-8-0. This board is designed with High Profile Pins to receive a Soundraxx or ESU Decoder and provides an onboard Keep Alive® for...

This motherboard is designed to replace the existing circuit board in a Bachmann Light 4-8-2 (short tender) or the 2-8-0. This board provides an onboard Keep Alive® for uninterrupted performance over troublesome tracks. NOTE: This product does...