Electronics

This M4 decoder (see M4 for more information) comes connected to a 3.5" (8.89 cm) long harness which is terminated with a 8-Pin NMRA plug. From M4 listing 1011 Back EMF Load Compensation: Provides superior slow speed control and high performance...

This M4 decoder (see M4 for more information) comes connected to a 3.5" (8.89 cm) long harness which is terminated with a 8-Pin NMRA plug rotated 180 degrees from the standard orientation. This allows the decoder to fit better in certain applications...

This M4 decoder (see M4 for more information) comes connected to a 3.5" (8.89 cm) long harness which is terminated with a 8-Pin NMRA plug rotated 90 degrees from the standard orientation. This allows the decoder to accommodate the UK's narrow gauge...

This M4 decoder (see M4 for more information) comes connected to a 5" (12.7 cm) long harness which is terminated with a 8-Pin NMRA plug. From M4 listing 1011 Back EMF Load Compensation: Provides superior slow speed control and high performance...

This product is used with the LT-50 "Layout Throttle." This panel can be used to create a DCC track output when used with an LT-50 using the specified jack. A single additional wired LCC throttle can be connected to the front of the panel, and this...

The LT-50 "Layout Throttle" is an intelligently-designed wired LCC throttle with a built-in command station. Ergonomically designed to comfortably fit your hand and provide easy access to all of the buttons, the LT-50 is the perfect DCC command station...

The B-106 is an intelligently-designed DCC Auxiliary Booster with LCC integration as well as a built-in RailCom® detector. Thoughtfully designed to outperform in every area, the B-106 is the perfect for layout builders or renovators looking for a...

The BA-100 “Booster Adapter” is a product which can be used to connect different manufacturers’ DCC boosters (and command stations) together. This product is intended to offer a quick and easy way to “plug and play”...

This product is an expansion panel for an LCC network, such as those created and used by the CS-105 and LT-50. Use this product to expand the number of wired throttles such as the T-50 you can connect to the TCS command station, or to provide an access...

This custom-designed holder can hold a single TCS UWT-100 throttle. Includes: 1 - 3D printed holder designed perfectly for the UWT-100 1 - Bag of 2 Screws

This custom-designed holder can hold a single TCS throttle such as the UWT-50, LT-50, or UWT-100! Includes: 1 - 3D printed holder designed perfectly for UWT50, LT-50, and UWT-100. 1 - Bag of 4 Screws

Buy this pack and save on UWT-100 Throttle holders! This holder only fits the UWT-100. Includes: 3 - 3D printed holder designed perfectly for the UWT-100 3 - Bags of 2 Screws

Buy this pack and save on UWT-50/100 Throttle holders! This holder can be used with the UWT-50, LT-50, or UWT-100! Includes: 3 - 3D printed holder designed perfectly for UWT-50, LT-50, and UWT-100 throttles. 3 - Bags of 4 Screws

Note: designed for use with Tortoise(TM) switch machines manufactured after May/June 2020. See ACL1001 for old version SNAPS! is a new product that we have developed and manufactured in-house here at ACCU-LITES, Inc. SNAPS! is a EZ wiring connector for...

Note: designed for use with Tortoise(TM) switch machines manufactured after May/June 2020. See ACL1001 for old version SNAPS! is a new product that we have developed and manufactured in-house here at ACCU-LITES, Inc. SNAPS! is a EZ wiring connector for...

SwitchPilot 3 Plus decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption. In order to facilitate the rather...

Control one twin coil "Snap" switch machine. Has capacitive discharge for low current draw of track power. Provides connections for two "local control" pushbuttons. You can control switches from your cabs and your control panels.

Note: designed for use with Tortoise(TM) switch machines manufactured after May/June 2020. See ACL1001 for old version  SNAPS! is a new product that we have developed and manufactured in-house here at ACCU-LITES, Inc. SNAPS! is a EZ wiring connector...

Keep your wiring organised and tidy with these self adhesive clips. Pack of 20 clips

SwitchPilot 3 decoders are optimized for stationary use on your system and can switch conventional double coil switch drives, light signals, magnetic uncouplers, light bulbs or other stationary consumption.In order to facilitate the rather cumbersome...