Electronics

Since smart phones with touch screens have almost completely replaced the conventional mobile phone, model train enthusiasts and manufacturers face the question how to employ more powerful devices for controlling model trains. As a result of this, many...

The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a...

The RailNet Environmental Sound Module Pro Sync Board listens to the sound from the Environmental Sound Module Pro and drives LEDs based on audio intensity — creating lightning, welding, and fire effects that feel natural and alive. Instructions on...

(Block Occupancy Detector-8 - SM) This new board is compatible with LCC node sample mode which allows using output drivers on the same I/O port. This board operates as a DCC occupancy detector for 8 blocks using remote CT coils. It outputs logic levels,...

Set of 8 CT (Current Transformer) coils for BOD-8. These 100:1 toroid coils sense the track current on leads passing through the hole in the middle of the coil. They connect to the BOD-8 with twisted pair cable such as CAT-3 or CAT-5 network cable. (up...

16 Led drivers plus 8 line Input/Output node for NMRA CAN bus LCC®. Logic level I/O port compatible with other standard RR-CirKits I/O modules. Boot Loader for user installable firmware upgrades.  Includes powerful internal Logic Elements...

Adds a program track output to the PowerCab. Prevents accidental programming of locos on your mainline track when using Program Track mode. Automatically disconnects your main line when in Program Track mode. Does not affect OPS mode programming /...

This colored wire will make wiring your layout easier than ever! Twenty gauge stranded copper; 50' reel.

In-Cab Sound from the comfort of your home   The Analog Sound Box has been developed as a joint effort between engineers at Kato and Soundtraxx to craft a simple, versatile, and powerful sound system for use on non-DCC layouts. Completely...

Wire color: red, orange and brown. Includes 1- Spool--Hook-Up Wire (3 Conductor). Number of Feet (12') (3.6m).

16 Led drivers plus 8 line Input/Output node for NMRA CAN bus LCC®. Logic level I/O port compatible with other standard RR-CirKits I/O modules. Boot Loader for user installable firmware upgrades. Includes powerful internal Logic Elements. Compatible with...

LCC Starter Kit Includes: LCC Buffer-USB Power-Point 2 Terminators 1' LCC cable and USB cable

This Breakout board allows easy solder free connections from up to 8 Quik-Link devices to 10 pin I/O cables using 3 wire servo style cables. Also compatible with Berrett Hill products.

This board is normally used for block detection on three rail layouts. This version of the board includes internal current limiters. Useful anyplace that an external voltage needs to be monitored. (5V-20V AC-DC-DCC)

(Stall Motor Driver) LCC sample mode compatible. This 8 output, optically isolated, low current "H" bridge driver is designed for control of 8 stall motor switch machines. (E.g. Tortoises®) It can drive up to 100ma. per line, speed regulated output 6 to...

DCC Main Bus Wire, (Red), 14AWG, 100 Feet NCE Multi Scale DCC Main Bus Wire Red 100'

LCC Buffer-USB Features:  • NMRA CAN bus LCC® to USB interface.  • 2,500 Volt High Speed Digital isolation between CAN bus LCC® and USB port.  • Simplify your LCC configuration and/or use a PC based CTC.  • Compatible with JMRI...

15V DC Power Adapter (1500mA Output, 100-240V AC Input) This high quality regulated switching power adapter powers any 15 Volt DC device up to 1.5 Amp. Made with quality in mind, this unit outperforms similar products. Let RR-CirKits keep your devices...

Works with the NCE Power Cab or Cab Bus. See WFD-30 for use with only NCE Cab Bus Install this Wi-Fi device on your NCE layout to provide Wi-Fi access.  Then use the power of the TCS universal WiFi throttles on your NCE layout to control trains. A...