Electronics

The Tortoise Quik-Link is a plug on Tortoise driver board. Breakaway connector inserts allow use on older Tortoises with narrow paddle contacts. It connects directly to any LCC output port with a standard 10 pin ribbon cable or via a QL-Breakout using a...

5 Amp Trip / 3 A Continuous Duty DCC Booster BoardDCC Booster board without the power supply.  These boards can be used to make locomotive Power Districts or an Accessory District with a shared power supply.  A jumper is used to set...

The LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All LokSound...

Speakers for model trains

Control one twin coil "Snap" switch machine. Has capacitive discharge for low current draw of track power. Provides connections for two "local control" pushbuttons. You can control switches from your cabs and your control panels.

This plastic mounting track is suitable for mounting two I/O modules to a flat surface. (3 1/2" x 4")

This plastic mounting track is suitable for mounting three I/O modules to a flat surface. (3 1/2" x 6")

This plastic mounting track is suitable for mounting six I/O modules to a flat surface. (3 1/2" x 12")

Servo Connection Cable (M-M) This 20" cable may be used to connect two Quik-Link devices.

Single CT (Current Transformer) coil.

Set of 4 CT (Current Transformer) coils for BOD4 or BOD4-CP.

This custom-designed holder can hold a single TCS throttle such as the UWT-50, LT-50, or UWT-100! Includes: 1 - 3D printed holder designed perfectly for UWT50, LT-50, and UWT-100. 1 - Bag of 4 Screws

With our small relay, loads are controllable whose draw exceeds the decoder’s function output. Put the relay between output and load.

 The LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All...

Speakers for model trains

2-wire stay alive device compatible with Tsunami2 and TCS decoders.

Servos, mounting brackets, extension cables, Y cables and reversers and parts to make working with servos easier. As well as the servo decoders on the Tam Valley Depot website, all of the servo products on this page work with all R/C servo controllers...

This function-only decoder is designed for any scale where extra lighting features and functions are needed. These decoders are commonly used for smoke coils, fireboxes, or step lights. Note: FL-series decoders do not provide motor control. A separate...

This colored wire will make wiring your layout easier than ever! Twenty gauge stranded copper; 50' reel.

The LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All LokSound...