Electronics

Fits many Kato N-locomotives Drop-in light board replacement decoder for Kato “K1” form-factor boards 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma output Replaces both the DN163K1C & DN163K1D

Fits many older Atlas N locomotives Mobile Decoder Drop in “A0” Atlas light board replacement decoder 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma output

Fits New InterMountain N Scale SD40-2 released 2017 1.5 Amp/2 Amp Peak 6 FX3 Functions, 0.5 Amp .329” x 2.603” x .065”8.36mm x 66.11mm x 1.64mm

 The LokSound 5 micro DCC Direct Kato USA has been specially developed for installation in track N vehicles of the Kato USA brand: Most diesel locomotives of this manufacturer are installed in the American model of these decoders instead of the...

  Replaces DN163A2 Board Replacement Decoder for Atlas N Scale GP7, GP9 and GP15-1, GP30, GP35 and similar locos Decoder Lock equipped

Fits many Kato N-locomotives Drop-in light board replacement decoder for Kato “K0” form-factor boards 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma output

  Board Replacement Decoder for Kato N-Scale Glacier Express 1.5 Amp/2.0 Amps Peak Motor Current Rating 6 FX3 Functions-500mA Function Current Rating

8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 For Kato SD40-2 and similar Drop-in light board replacement 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma Output 8 Ohm 9x18x4 mm oval speaker 100uF Capacitor

The CN-GP is a N-scale drop-in decoder for Atlas, Kato, and Life Like locomotives. Examples include the following:   Atlas: GP7/GP9 GP30/GP40/GP60   Kato: SD40   Life Like: GP18 GP60   See the Installations Page for a full list...

Finally… a camera for N-Scale!! Climb into the Cab and experience your layout with a Choo Choo Vision Model Railroad CAB-CAM.  View your layout in real-time from the Engineer’s point-of-view — A realistic and immersive experience...

 The LokPilot 5 Nano DCC is the “twin” of the LokSound 5 Nano DCC. At 19.6 mm x 8.5 mm and a thickness of only 3.2 mm, it is exactly the same size as the corresponding LokSound decoder, but does without the sound functions. The LokPilot 5 Nano DCC...

2 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits many HO locomotives Digitrax Easy Connect 8 Pin Harness Motor 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma Output New sound .spjs loadable with Digitrax USB...

Fits many older Atlas N locomotives Mobile Decoder Drop in “A1” Atlas light board replacement decoder 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma output

Fits many Kato N-locomotives Drop-in light board replacement decoder for Kato “K2” form-factor boards 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma output

Fits many Kato N-locomotives Drop-in light board replacement decoder for Kato “K0” form-factor boards 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma output

NOTE: This product is intended for use with N-scale decoders and locomotives. TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA-N1 can power an...

Fits E24 socket locomotives N-Scale Mobile Decoder 13 FX3 Functions, 200mA capacity Motor drive at connector capacity

  Digitrax LocoMotion™ System Your locomotives look like the real thing. The Digitrax LocoMotion™ System makes them run like the real thing, too!Torque Compensation for smooth as silk silent operation. 128 Speed Step operation (14 or 28 steps...

8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 For Kato N P42 and similar 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma Output 8 Ohm 13mm round Speaker 100uF Capacitor

The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a...