Electronics

Fits Intermountain N scale SD40T-2 / SD45T-2 6 FX3 Functions 3.5” x .367” x .135” w/ LED88.9mm x 9.32mm x 3.42 mm Replaces DN163I0   ▪FX3 Function outputs for prototypical lighting effects and on/off...

Decoder for head and tail lights The decoder "FL12" that controls the headlights and taillights is equipped with a dimming function. Headlights that used to emit light with MAX power can be dimmed.

The K0D8-D is a N-scale drop-in decoder for Kato B-unit locomotives. Examples include the following: Kato: PB-1 F3B F7B E9B See the installation pages for a full list of compatible engines! Note: The K0D8 line of decoders are available with...

The ALD4 is a N-scale drop-in decoder for Atlas locomotives. Examples include the following: Atlas: SD50 SD60 See the installation pages for a full list of compatible engines! Back EMF Load Compensation: Provides superior slow speed...

The K0D8 is a N-scale drop-in decoder for Kato locomotives. Examples include the following: Kato: ALCO PA-1 E5A E6A E8A E9A See the Installation Pages for a full list of compatible engines! Note: The K0D8 line of decoders are available...

The K0D8 is a N-scale drop-in decoder for Kato locomotives. Examples include the following: Kato: E7A See the Installation Pages for a full list of compatible engines! Note: The K0D8 line of decoders are available with different...

 Board Replacement Decoder for Walthers Proto GP20 and similar locos 

The K3D3 is a N-scale drop-in decoder designed specifically to fit the Kato N-Scale NW2 locomotive. Note: This decoder is very fragile due to its thickness and physical design. Special caution should be taken when installing to ensure the PCB is...

 Features: DN143K2 makes installation possible though it is somewhat challenging because of the model itself. If you use reasonable care, you will be able to handle this installation. RDC Special Lighting: 3 light boards included with decoder,...

Mobile Decoder Fits Next18 socket locomotives Plug-in Next18 connector Motor drive at connector capacity 6 FX3 Functions

Fits several Atlas N locomotives Mobile Decoder with SoundFX 8 Ohm 9x18x4 mm oval speaker 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma output

With the LokSound 5 Nano DCC, ESU has succeeded in developing an even smaller LokSound decoder! Thus, it should really be used in all vehicles of nominal sizes N and TT.   The LokSound 5 Nano DCC with E24 interface has a size of 19.6mm x 8.5mm...

Series 6 Features 2 FX3 Functions .418” x .621” x .107”10.63mm x 15.79mm x 2.72mm Fits MicroTrains Line SW1500 units

Fits E24 plug N locomotives and compatible units Plug-in E24 socket Motor drive at connector capacity 13 FX7 Functions, 200mA capacity 8 CV Selectable Steam & Diesel Sound Schemes Included

The LokSound 5 micro DCC Direct Kato Japan has been specially developed for installation in Kato-branded track N vehicles: in many European and Japanese locomotives of this manufacturer, the ser decoder can be installed directly below the engine instead...

The LokSound 5 micro DCC Direct Kato USA SC44 was specially developed for installation in some Kato USA N gauge vehicles: It fits in all Kato N scale locomotives Siemens SC44 “Charger” or MP36 instead of the standard analog board. Finally,...

The LokSound 5 micro DCC Direct Kato USA SD90 was specially developed for installation in some Kato USA N gauge vehicles: It fits in all Kato N gauge locomotives of the SD90, SD90/43MAC or SD80MAC models instead of the standard analog board. Finally,...

The LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed circuit boards and the latest manufacturing technology, it is so small with only 8.0mm x 7.0mm and a thickness of...

The LokPilot 5 micro DCC Direct Kato USA Widebody is the “twin” of the LokSound 5 micro DCC Direct Kato USA Widebody. With its dimensions of 47.5mm x 14.0mm x 4.5mm it  has been specially developed for installation in wide body N...