Electronics

 Fits Many DCC-Ready N and HO Scale Locomotives Size: 1.158” x .386” x .115” 29.43mm x 9.81mm x 2.98mm N Scale 1.0 Amp/1.5 Amps Peak FX3 Function outputs for prototypical lighting effects and on/off control: Constant Brightness Lighting...

The LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed circuit boards and the latest manufacturing technology, it is so small with only 8.0mm x 7.0mm and a thickness of...

The K5D7 is a N-scale drop-in decoder specifically designed to fit the Kato F40PH locomotive. This decoder includes onboard LED’s for the forward, reverse, and red marker lights. The red marker lights will operate automatically in the reverse...

A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer...

A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer...

A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer...

The VO-1000 is a N-scale drop-in decoder which is specifically designed for the Atlas VO-1000 locomotive. Back EMF Load Compensation: Provides superior slow speed control and high performance under load. Quiet Drive: Super-quiet motor...

Fits many Kato N-locomotives Drop-in light board replacement decoder for Kato “K0” form-factor boards 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma output

8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 Fits Atlas N FA-1 locomotive and others Plug-in Next18 connector Motor drive at connector capacity 6 FX3 Functions New sound .spjs loadable with Digitrax USB...

The MP-15N is a N-scale drop-in decoder which is designed for the Atlas MP-15 locomotive. See the installation pages for a full list of compatible engines! Back EMF Load Compensation: Provides superior slow speed control and high performance...

The K0D8-F is a N-scale drop-in decoder designed specifically for the Kato FP7A locomotive. Note: The K0D8 line of decoders are available with different lighting configurations. Pay special attention to the compatibility. The...

A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer...

For Intermountain N scale FP7A and FP9A with motor contact "shoes" 6 FX3 Functions .472” x 2.165” x .098”11.98mm x 54.99mm x 2.4 mm Replaces DN163I2   ▪FX3 Function outputs for prototypical lighting effects and on/off...

 Board Replacement Decoder for Kato N-Scale E5 1.5 Amp/2.0 Amps Peak Motor Current Rating 6 FX3 Functions-500mA Function Current Rating Note: DN163K0A will not fit in the new E5 locos.

This decoder is compatible with the NEM651 standard interface found in some N-scale Bachmann and Fox Valley Models locomotives. The EUN651P-18 is wired to a 18mm harness terminated in a 6-pin NEM plug. Back EMF Load Compensation:Provides superior slow...

The LokPilot 5 Fx micro and its "twin" LokPilot 5 Fx micro DCC are versatile decoders with a Next18 interface on a footprint of 13.0mm x 9.2mm. They are used in all vehicles of nominal sizes N to H0, which do not have an engine output, but should still...

The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a...

The IMD4 is a N-scale drop-in decoder which is designed for InterMountain locomotives. Examples include the following: InterMountain: SD40T-2 SD45T-2 SD45-2 See the installation pages for a full list of compatible engines! Back EMF Load...

This full featured 2 function BEMF decoder is designed specifically to meet the needs of Z and N-Scale modelers who are converting their Z and N-Scale locomotives to DCC. Included is our auto-adjusting BEMF for outstanding slow speed performance and...

The K6D4 decoder is specifically designed to operate the Kato N-Scale FEF-3 4-8-4 steam locomotive.   Note: This decoder features a specialized motor control algorithm for use with the core-less motor used in the FEF-3. For use in other...