Electronics

For Intermountain N scale F3 and F7 A & B units with motor contact "shoes" 6 FX3 Functions .472” x 2.165” x .098”11.98mm x 54.99mm x 2.4 mm Replaces DN163I1C   ▪FX3 Function outputs for prototypical lighting...

SP28288 - Round 28mm 8 Ohm Speaker with wires.Great for HO installations. Used on current production SFX0416 sound and function decoder. Digitrax recommends the use of a baffle or speaker enclosure with this speaker for maximum sound output.

With our small relay, loads are controllable whose draw exceeds the decoder’s function output. Put the relay between output and load.

 The LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All...

The LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of gauge H0 and 0. LokPilot 5 decoders are offered with all common interfaces. Modes The LokPilot 5 is a real...

Prodigy Advanced & Tech 6 Extension Plate and CablesAllows user to extend the range of two handhelds by more than 9 feet. Plug-in port for mounting around your layout All Cables include RJ45 connectors - Plug and Play Ready for mounting - Screws...

Plug in 4 function decoder with 6 pin NEM 651 connector Dimensions: 2.65 X 8.77 mm Includes pins 19.41 mm

2-wire stay alive device compatible with Tsunami2 and TCS decoders.

This snap-together baffle kit is designed for use with our 15mm round speakers (P.N. 810089).

If you have more space, this speaker is great for larger models. Dimensions: 35 x 20 x 5.3mm(D)Frequency Response: 560Hz - 20kHzPower: 1 Watt (Nominal) 2 Watts (Peak)Impedance: 8 Ohms

A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer...

This function-only decoder is designed for any scale where extra lighting features and functions are needed. These decoders are commonly used for smoke coils, fireboxes, or step lights. Note: FL-series decoders do not provide motor control. A separate...

This colored wire will make wiring your layout easier than ever! Twenty gauge stranded copper; 50' reel.

Fits many 8-pin Medium Socket DCC-Ready HO locomotives Digitrax 9-Pin Socket and P-Harness 1.0 Amp/2 Amps Peak 8 FX7 Functions, 300ma Output

For Intermountain N scale FT A units with motor contact "shoes" 6 FX3 Functions .472” x 2.165” x .098”11.98mm x 54.99mm x 2.4 mm Replaces DN163I1A   ▪FX3 Function outputs for prototypical lighting effects and on/off...

For Intermountain N scale FP7A and FP9A with motor contact "shoes" 6 FX3 Functions .472” x 2.165” x .098”11.98mm x 54.99mm x 2.4 mm Replaces DN163I2   ▪FX3 Function outputs for prototypical lighting effects and on/off...

Fits many Kato HO legacy locomotives Drop-in light board replacement 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output 8 Ohm 26x16x9 mm box speaker w/330uF Capacitor

The LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All LokSound...

The LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of gauge H0 and 0. LokPilot 5 decoders are offered with all common interfaces. Modes The LokPilot 5 is a real...

The LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of gauge H0 and 0. LokPilot 5 decoders are offered with all common interfaces. Modes The LokPilot 5 is a real...