Electronics

This function-only decoder is designed for any scale where extra lighting features and functions are needed. These decoders are commonly used for smoke coils, fireboxes, or step lights. Note: FL-series decoders do not provide motor control. A separate...

Fits many 8-pin Medium Socket DCC-Ready HO locomotives Digitrax 9-Pin Socket and P-Harness 1.0 Amp/2 Amps Peak 8 FX7 Functions, 300ma Output

For Intermountain N scale FT A units with motor contact "shoes" 6 FX3 Functions .472” x 2.165” x .098”11.98mm x 54.99mm x 2.4 mm Replaces DN163I1A   ▪FX3 Function outputs for prototypical lighting effects and on/off...

For Intermountain N scale FP7A and FP9A with motor contact "shoes" 6 FX3 Functions .472” x 2.165” x .098”11.98mm x 54.99mm x 2.4 mm Replaces DN163I2   ▪FX3 Function outputs for prototypical lighting effects and on/off...

Fits many Kato HO legacy locomotives Drop-in light board replacement 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output 8 Ohm 26x16x9 mm box speaker w/330uF Capacitor

The LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All LokSound...

The LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of gauge H0 and 0. LokPilot 5 decoders are offered with all common interfaces. Modes The LokPilot 5 is a real...

The LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of gauge H0 and 0. LokPilot 5 decoders are offered with all common interfaces. Modes The LokPilot 5 is a real...

Speakers for model trains

Speakers for model trains

A 1 foot (36in) length of CAT6a cable. Useable in different applications such as connecting systems or DCC systems to computers.

Stranded, 550 MHz, UTP, Pure Bare Copper Wire, 24AWG, 5ft, White.

(10 position IDC male with latch) Box of 10 Insulation Displacement Connectors for use with 10 wire flat ribbon cable. Use with IDC-S10 to create extension cables. Screw ears allow easy mounting to the layout.

(Single Coil Solenoid Driver) This 8 line, optically isolated, single ended, high current, high voltage DC driver can drive up to 1A continous per line at up to 30VDC. When used with custom Tower LCC settings and a CD power supply this board will drive 4...

The TAB is designed to provide a solder-less connection between the SMD-8 and Tortoise. It includes 10 pin daisy chain cable headers and channel selection jumpers. Breakaway connector inserts allow use on older Tortoises with narrow paddle contacts. An 8...

This snap-together baffle kit is designed for use with our 20mm round speakers (P.N. 810053).

If you have more space, this speaker works well for larger models. Dimensions: 30 x 5.3mm(D)Frequency Response: 490Hz - 10kHzPower: .5 Watt (Nominal) 1 Watt (Peak)Impedance: 8 Ohms

This speaker is great for boosting the low frequencies in most diesel and “big” steam sounds. Dimensions: 27 x 14.3mm(D)Frequency Response: 350Hz - 20kHzPower: 1 Watt (Nominal) 2 Watts (Peak)Impedance: 8 Ohms

Available in 10-foot lengths, this ultra-flexible 30AWG wire makes decoder installations a breeze. We offer 11 colors to match the NMRA and SoundTraxx standards.

A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer...