Electronics

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA5 includes an additional fifth supercapacitor, increasing the maximum capacity...

Atlas RS speaker housing for the TCS 35mm x 16mm oval speaker (included). This speaker housing replaces the weight in the locomotive. Re-use the two screws from the weight (they will need to be shortened a bit) to secure the speaker housing...

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA5 includes an additional fifth supercapacitor, increasing the maximum capacity and peak...

Each card contains 50' of 5 conductor stranded ribbon wire that can be used with any scale Atlas switch machines. Also can be used as layout wire.

Board Replacement Decoder for American Z Line (AZL) GP-30 Diesels and others.  1 Amp with 2 FX3 Functions.   Specifications Current Rating-Motor 1.0 Amp/1.25 Amps Peak Size 0.271” x 1.296” x .099” (6.8834mm x 32...

Fits Kato AC4400 or compatible HO locomotives Drop-in light board replacement 1.0 Amp/2 Amps Peak 8 FX3 Functions, 200ma Output 8 Ohm 28 mm round speaker w/330uF Capacitor

SP282832 - Round 28mm 32 Ohm Speaker with wires. Great for HO installations. Used on current production SFX004, SFX064D, SDH164D & SDH164K1A sound decoders. Digitrax recommends the use of a baffle or speaker enclosure to maximize sound output when...

The Mobile Control Pro is ESU's latest answer to the question of how to combine the advantages of smartphone technology with the needs of model railway control. The Mobile Control Pro is essentially a compact Android-based tablet equipped with controls...

The ESU PowerPack Midi can be wired to all fifth generation ESU decoders (LokSound 5, LokPilot 5, LokPilot 5 Basic). It reliably supplies energy to your locomotive when traversing dirty track or long turnout ladders. With its energy storage (6x1 Farad...

The LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0...

The LokPilot 5 Fx micro and its "twin" LokPilot 5 Fx micro DCC are versatile decoders with a Next18 interface on a footprint of 13.0mm x 9.2mm. They are used in all vehicles of nominal sizes N to H0, which do not have an engine output, but should...

The LokPilot 5 Fx micro and its "twin" LokPilot 5 Fx micro DCC are versatile decoders with a Next18 interface on a footprint of 13.0mm x 9.2mm. They are used in all vehicles of nominal sizes N to H0, which do not have an engine output, but should still...

The LokPilot 5 Fx DCC is a function decoder without motor output and is therefore perfect for installation in control cars or function models. As the "twin brother" of the LokPilot 5 Fx, it shares its characteristics and also the basic...

The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a...

Speakers for model trains

Speakers for model trains

Speakers for model trains

Speakers for model trains

A 1 foot (12in) length of CAT6a cable. Useable in different applications such as connecting systems or DCC systems to computers.

Servo Extension Cable (M-F) This 39" cable may be used to extend the length of the above (M-M) cables.