Electronics

Fits New InterMountain N Scale SD40-2 released 2017 1.5 Amp/2 Amp Peak 6 FX3 Functions, 0.5 Amp .329” x 2.603” x .065”8.36mm x 66.11mm x 1.64mm

 The LokSound 5 micro DCC Direct Kato USA has been specially developed for installation in track N vehicles of the Kato USA brand: Most diesel locomotives of this manufacturer are installed in the American model of these decoders instead of the...

Dual Stationary Decoder for Bi-polar, Snap Switches or Slow Motion Machines DS52 Features: Simple hook up and set up. Control 2 individual turnout machines. 2 Slow motion turnout machines, such as Tortoise™ by Circuitron or Switchmaster or 2 Solenoid...

A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer...

  Replaces DN163A2 Board Replacement Decoder for Atlas N Scale GP7, GP9 and GP15-1, GP30, GP35 and similar locos Decoder Lock equipped

Everything you need to get started with Advanced Digitrax Command Control.   Evolution Express is perfect for most home and club layouts wanting Duplex Radio control out of the box.  It offers excellent speed control, prototypical consisting,...

A true pioneer in the model train industry, SoundTraxx has been creating innovative products for the discriminating model railroader since 1990. We proudly design and manufacture our industry-best products right here in the USA, and our friendly customer...

Fits many Kato N-locomotives Drop-in light board replacement decoder for Kato “K0” form-factor boards 1.0 Amp/2 Amps Peak 6 FX3 Functions, 200ma output

Athearn Dual Cube Speaker Assembly

With Black w/ White Stripe wire and Blue wire for power. The Keep Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA4 will power an HO-Scale locomotive with...

All plug-in connectors for simple and easy installation and service. User defined as 16 DS reporting addresses in 1 to 2000+ DS range. Easy setup with device Option Switches (OPSW) Powered by 2mm DC jack, 8V min to 22V max. Configured to operate with...

DCC Main Bus Wire, (Red), 14AWG, 50 Feet NCE Multi Scale DCC Main Bus Wire Red 50'

Fits many HO locomotives Digitrax 9-Pin Harness Socket 1.0 Amp/2 Amps Peak 2 FX7 Functions, 200ma Output

  Board Replacement Decoder for Kato N-Scale Glacier Express 1.5 Amp/2.0 Amps Peak Motor Current Rating 6 FX3 Functions-500mA Function Current Rating

Our tiniest speaker comes with a properly proportioned speaker enclosure and provides remarkable volume for tiny models! Dimensions: 13 x 9 x 9.4mm(D)Frequency Response: 100Hz - 10kHzPower: 40mW (Nominal) 75mW (Peak)Impedance: 32...

8 CV-Selectable Steam & Diesel Sound Schemes Included Mobile Decoder with SoundFX v3 For Kato SD40-2 and similar Drop-in light board replacement 1.0 Amp/2 Amps Peak 4 FX3 Functions, 200ma Output 8 Ohm 9x18x4 mm oval speaker 100uF Capacitor

The CN-GP is a N-scale drop-in decoder for Atlas, Kato, and Life Like locomotives. Examples include the following:   Atlas: GP7/GP9 GP30/GP40/GP60   Kato: SD40   Life Like: GP18 GP60   See the Installations Page for a full list...

The LokSound 5 Fx is a special feature of the LokSound family: it has no output and is specially designed for use in control cars or drive heads, which require a sound but do not have a model drive themselves. By omitting the engine part, it can still...

 The LokPilot 5 Nano DCC is the “twin” of the LokSound 5 Nano DCC. At 19.6 mm x 8.5 mm and a thickness of only 3.2 mm, it is exactly the same size as the corresponding LokSound decoder, but does without the sound functions. The LokPilot 5 Nano DCC...

 The LNWI allows you to connect compatible WiFi devices to LocoNet and run trains using compatible throttle apps. The apps available can be downloaded from this page. Wi-Fi interface to a Digitrax LocoNet for up to four compatible mobile Wi-Fi...