Electronics

The Cab06 uses a more conventional knob for speed control. The Cab06 can be set to YARD mode. Yard mode makes the speed knob act as a "center off" speed control. Turn the knob to the right and the loco will increase speed in the forward direction. Turn...

An entire DCC system in the palm of your hand! This 2 Amp system can operate up to 4 HO locomotives or 8 N scale locomotives running at the same time. Provides all of the capability and ease of use that you’ve heard about in our Power Pro system at an...

Our deluxe Radio Equipped Pro Cab R provides the most user-friendly access to all system features. Uncomplicated menus on the easy to read, backlit LCD display guide you through the most advanced operations with a minimum of fuss. Instant control of up...

Deluxe cab provides user-friendly access to advanced system features. Backlit LCD displays guide you through operations easily. Both a thumb wheel knob and repeating push buttons for speed control are provided. Control of single or multiple turnouts,...

Requires an MRC Prodigy Express2 or Prodigy Advance2 system. Works With ANY Brand Loco or DCC Decoder. Plug-N-Play Setup and Operation. Module acts as an interface between the two most popular smartphone apps: WiThrottle for iPhone®,...

For the beginner who needs more sophistication.ProdigyExpress 2 features... 1.6 Amps of Power 28 Accessory Functions Program all CV's Two or Four digit addressing (0-9999 addresses available) Advanced consisting Simultaneously run multiple...

0001325 Throttlepack Handheld 9900/9950 Instruction Manual

ESU 50322 Speaker Monacor Sp6/4SQ, 59mm Round 8 Ohms, for PIKO G/LGB Loks 59mm Round 8 ohm 1-2 Watts for PIKO G/LGB Loks The speaker is specifically selected for use with the LokSound XL decoder. Additionally, the speaker is suitable...

  The LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All...

 The LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit into all N gauge and TT vehicles, but is also suitable for small H0 vehicles. All...

With its unique design the LokSound 5 Direct DCC can easily replaceboards that provide poor motor control, low volume, or generally inferiorsound. Not only will the decoder work fine with most factory installedspeakers, but it will sound even better with...

  LokSound 5 micro DCC "blank decoder", 8-pin NEM652, gauge: N, TT, H0   The LokSound 5 micro is a “little wonder”: With only 21mmx10mm footprint, it is by far one of the smallest LokSound decoders we’ve ever built. Thus it should fit...

 The LokSound 5 micro DCC Direct has been specially developed for installation in Spur N vehicles of the Atlas and Intermountain brands: it can be inserted directly instead of the analog board installed there as standard. However, the decoder can...

 The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into...

 The LokSound 5 is the most important member of the LokSound family. Due to the combination of the digital decoder and the sound module on one circuit board we achieve the smallest possible dimensions of 30 mm x 15.5 mm. Therefore it fits into...

Decoder tester (Replaces 51900), NEM651, NEM652, 21MTC, PluX22, Next18, single wires. With motor, LED-Monitor and 20mm speaker. New socket to accept decoder tester extension 53901Â Perhaps you are familiar with this scenario: there is a digital decoder...

LokProgrammer set: LokProgrammer unit, US 110V power supply, and serial to USB PC cable Dimensions: 95mm (3.74") x 85mm (3.35") x 22mm (0.87")   You want to listen to the sound spectrum of your favourite loco, or the special sound of that loco...